Octava HDMXA71-V1.3 Installation Manual - page 8
9
7
8
Remote Control Guide:
Octava’s Remote control uses discrete code so can be easily
integrated with most Universal Remote Controls such as Logitech’s
Harmony.
Basic Quick Start:
Use the remote control to select the Display that you wish to
control followed by the Input (DVD, Settop) that you wish to watch.
For example:
-Pressing Display B, “2” will switch Input 2 to HDMI Out B.
-To connect DIPLAY A to IN1 and DISPLAY B to IN3 you simply
follow this sequence
Step 1) Display A, 1 (this will set Display A to Input 1)
Step 2) Display B, 3 (this will set Display B to Input 3)
Here are some more examples:
Button Function
Notes
+, -
Increments/Decrements to the next
available Source
1,2,3,4 Selects
the
corresponding numbered
source.
Turns ON/OFF the LED light.
Turns ON HDMI switch.
Put HDMI switch to Standby mode.
Select Audio 7.1
Other
Not used
Output Selection
(Step 1)
Input Selection
(Step2)
Result
DISPLAY A
“2”
Display A switches to
Input 2
DISPLAY B
“1”
Display B switches to
Input 1
DISPLAY A
“+”
Display A increments to
next available Input
DISPLAY B
“-”
Display B decrements to
next available Input
Pressing ON/OFF
Turns On/Off the
HDMI switch.
Pressing 1…4
Selects the
corresponding numbered
source.
Pressing LED
Turns on/off the
Blue LED light.
Pressing +/-
Increments/Decrements
to the next available
Source.
Pressing AUX
Select Audio 7.1
Pressing A-D
Selects the Display to be
controlled.