Odyssey 7Q User Manual - page 7
CONTINUED »
PANASONIC LUMIX GH4
6. SET HDMI CADENCE
Connect HDMI input, and verify the camera internal record rate matches the input indicator
on the Odyssey. If it does not a Cadence may be needed to correctly reflect the format in
which you wish to record.
☼ » SETUP » VIDEO CADENCE » PROGRESSIVE
PROGRESSIVE
Use this setting for 720p50/60, 1080p24**, 25*,30*
*Note typically the camera will need to be set to record 1080p25/30 internally, and the
output is set to 1080i.
**Note that when wishing to record 1080p24, HDMI output can be set to “Auto” or 1080i,
therefore Progressive should be used when auto is selected.
INTERLACED
Use this setting for 1080i50, 1080i59.94 recording
3:2 PULLDOWN*/**
Use this setting for 1080p24 recording when the camera only has a output setting of
1080i, also note the camera must be set to record 1080p24 or 1080p23.98 internally,
**Note that when wishing to record 1080p24, HDMI output can be set to “Auto” or 1080i,
therefore 3:2 pulldown should be used when 1080i is selected.
6