Odyssey Galaxy Seeker II Instruction & Reference Manual - page 5
GALAXY SEEKER II LIVE STREAMING HD VIDRO DRONE • ADVANCED FEATURES
By default, the clearly marked cockpit on the unit is
considered the front. When flying the unit, your
movements with the remote control will work
according to the direction of the cockpit. However,
this makes the unit very hard to fly at long range as it
becomes difficult to tell which direction the cockpit is
pointing.
SmartFly mode gives you sure control by making the
Drone respond to directions as if it's facing the way
you are facing. Your left, right, up, and down become
the same for you and your Drone!
To initiate this mode, press the SmartFly button on the
lower, left of the Remote Transmitter for 3 seconds. To
terminate the mode, press the button again for three
seconds.
HomeBeacon works with SmartFly mode to return your Drone to
you immediately. Once you've initiated SmartFly (see above), press
the HomeBeacon button on the lower, right side of Remote
Transmitter for 3 seconds, until you hear three "ticks." Your Drone
will automatically fly back in the direction of the Transmitter