Odyssey ODY-1717NX Instruction Manual

Charging the Pocket Drone Battery 

Please Note: The Pocket Drone comes 

with a partially charged battery, however 

in the case that you need to charge the 

battery please follow the instructions 

below.

Step 1 On the back of the drone push 

the drone’s battery lid up until it clicks. 

Then lift it up and push it back until it 

clicks again into place. 

Step 2 Carefully remove the battery and 

disconnect it from the drone by lightly 

pulling on the black and white port.

Important: Do not pull on the wires to 

remove the battery as this may damage 

the battery.

Step 3 Insert the white connector of the 

battery into the USB.

Step 4 Insert the USB into a computer. 

A red light will appear on the USB 

indicating the charge has started.

Step 5 The charge is complete when the 

red light disappears. Remove the USB 

from your computer and the battery from 

the USB.

Step 6 Insert the battery into the drone 

by connecting the white port to the white 

circuit and replace the lid by folding it 

down and pushing backwards until it 

clicks.

14+

INSPIRING IMAGINATION

INSPIRING IMAGINATION

Instruction Manual

ODY-1717NX