OHAUS CS 2000 Instruction Manual - En-8 Valor 2000
EN-8 Valor 2000
Series
Scales
The display flashes the full calibration point. Place the
specified weight on the scale and press the Yes button.
The display shows --C-- while the full calibration point is
established.
If linearity calibration was successful, dONE is displayed
and the scale exits to the active weighing mode and
displays the actual weight value.
4.3 RES Menu
RESOLUTION
Set the resolution to LO (low) or HI (high).
4.4 UNIT Menu
KILOGRAM UNIT
Set kilograms ON or OFF. When
kg
is lit,
press the Yes
button to access the
ON or OFF setting, then press No to
choose ON or OFF, then Yes to accept the setting.
GRAM UNIT
Set grams ON or OFF. When
g
is lit,
press the Yes button
to access the
ON or OFF setting, then press No to choose
ON or OFF, then Yes to accept the setting.
POUND UNIT
Set pounds ON or OFF. When
lb
is lit,
press the Yes
button to access the
ON or OFF setting, then press No to
choose ON or OFF, then Yes to accept the setting.
OUNCE UNIT
Set ounces ON or OFF. When
oz
is lit,
press the Yes
button to access the
ON or OFF setting, then press No to
choose ON or OFF, then Yes to accept the setting.