OHAUS SD Series User Manual - Auto Shut-Off

Other manuals for SD Series: Service Manual, Instruction Manual, Instruction Manual, Manual, User Manual

Manual is about: SD Series

Page of 18

Download

Print this page

Bookmark us

SD SERIES BENCH SCALE EN-7

•

Auto Shut-Off

To extend battery lfe, the scale wll automatcally turn off

after approxmately four mnutes of nactvty. Ths feature s only actve

durng battery operaton.

Dynamic Weighing

1. Wth platform empty, press the

UNITS

Cal

button untl the

ndcator • flashes next to the desred measurng unt.

2. Place a mass on the platform. The scale wll show “-A-”.

NOTE:

If usng a contaner, press

ON/ZERO

Off

to tare the

weght and return to zero.

3. Wth a mass on the platform or contaner, a short press of

UNITS

Cal

wll start the averagng countdown from

5 seconds.

4. The averaged weght s then dsplayed. The ndcator •

stops flashng when the process s complete.

5. The dsplay wll hold untl a button s pressed.

6. To repeat the process press

UNITS

Cal

wth a mass on the

platform or contaner.

7. To Ext, remove the mass from the platform or contaner and

press

UNITS

Cal.

« ‹ Prev 9 10 11 12 13 14 15 Next › »

Summary of SD Series

Page 1
Sd series bench scale.
Page 3
Ths product conforms to the emc drectve 89/336/eec and the low voltage drectve 73/23/eec. The complete declaraton of conformty s avalable from ohaus corporaton..
Page 4
Disposal in conformance wth the european drectve 2002/96 ec on waste electrcal and elec- tronc equpment (weee) ths devce may not be dsposed of n domestc waste. Ths also apples to countres outsde the eu, per ther specfc requrements. Please dspose of ths product n accordance wth local regulatons at th...
Page 5
V fcc note ths equpment has been tested and found to comply wth the lmts for a class b dgtal devce, pursuant to part 15 of the fcc rules. These lmts are desgned to provde reasonable protecton aganst harmful nterference n a resdental nstallaton. Ths equpment generates, uses and can radate rado freque...
Page 6: Ohaus Sd Series Bench Scale
Sd series bench scale en-1 ohaus sd series bench scale instruction manual • the contents of ths manual apples to all models of the sd seres bench scale. • calbraton weghts are not provded wth ths product. • for best results, use the product wthn the specfed operatng temperature range. • for best acc...
Page 7: Introduction
En-2 sd series bench scale introduction ths manual covers operaton for the ohaus sd seres bench scales. Unpacking sd seres bench scale s shpped wth the followng components: • indcator • ac power adapter • scale base • ths instructon manual • mountng brackets • warranty card leveling scale platform t...
Page 8: Note
Sd series bench scale en-3 battery installation (optional) • open the battery cover on the bottom of the indcator and nstall three “c” sze (lr14) alkalne batteres nto the compartment. Orent the batteres as shown on the nsde cover. Close the battery cover. Note : batteres are not ncluded. Fgure 2. Ba...
Page 9: Mounting Notes
En-4 sd series bench scale fgure 3. Drect wall mount arrangement. • bracket wall mounting/table mounting : attach the two mountng brackets as shown n fgure 4. Poston the indcator where desred on the wall or table. Install 2 screws (not suppled) nto the ends of each bracket to secure them to the surf...
Page 10: Product Features & Operation
Sd series bench scale en-5 product features & operation fgure 5. Indcator panel controls. Two button keypad • on/zero off : a short press turns on the scale when t s off. When the scale s on, a short press zeroes the scale, and a long press turns the scale off. • units cal : a short press changes th...
Page 11: Low Battery Indication
En-6 sd series bench scale • low battery indication : the battery symbol on the left sde of the dsplay ndcates a low battery condton. When frst dsplayed , approxmately 12 hours of operaton reman. When the battery s fully depleted, the scale wll momentarly dsplay “lo bat” and shut off. Operation • po...
Page 12: Auto Shut-Off
Sd series bench scale en-7 • auto shut-off : to extend battery lfe, the scale wll automatcally turn off after approxmately four mnutes of nactvty. Ths feature s only actve durng battery operaton. Dynamic weighing 1. Wth platform empty, press the units cal button untl the ndcator • flashes next to th...
Page 13: Calibration
En-8 sd series bench scale calibration for best results, calbrate the scale at regular ntervals. (calbraton weghts are not suppled wth the scale.) caution use extreme care when handling calibration weights as they are very heavy. Improper lifting methods or misuse of calibration weights may result i...
Page 14: On/zero
Sd series bench scale en-9 5. After the zero s captured, the requred span calbraton weght n the selected unt s dsplayed. 6. Place the calbraton weght on the platform and press on/zero off button. The dsplay wll agan show “-c-”. 7. After span capture, the dsplay wll return to the normal weghng mode. ...
Page 15: Model
En-10 sd series bench scale model sd35 sd75 sd200 capacty x readablty 35 x 0.02kg 77 x 0.05lb 75 x 0.05kg 165 x 0.1lb 200 x 0.1kg 440 x 0.2lb weghng unts kg, lb modes smple weghng, dynamc weghng calbraton weghts 25kg/50lb 50kg/100lb 100kg/200lb stablzaton tme wthn 3 seconds zero range to capacty by ...
Page 16: Model
Sd series bench scale en-11 model sd75l sd200l capacty x readablty 75 x 0.05kg 165 x 0.1lb 200 x 0.1kg 440 x 0.2lb weghng unts kg, lb modes smple weghng, dynamc weghng calbraton weghts 50kg/100lb 100kg/200lb stablzaton tme wthn 3 seconds zero range to capacty by subtracton maxmum overload 150% error...
Page 17
En-12 sd series bench scale fgure 6. Scale base overall dmensons. 53mm /2.09” 69mm / 2.72” 39mm / 1.54” 210mm / 8.27” 91mm / 3.58” 280mm / 11.02” 45mm / 1.77” fgure 5. Indcator overall dmensons, avalable vewng angles. 0º 50º 70º standard base large base 316mm / 12.44” 400 mm / 15.7” 520mm / 20.5” 75...
Page 18: Limited Warranty
Sd series bench scale en-13 limited warranty ohaus products are warranted aganst defects n materals and workmanshp for duraton of the warranty. Durng the warranty perod ohaus wll repar, or, at ts opton, replace any components) that proves to be defectve at no charge, provded that the product s retur...