OHAUS SF40A Service Manual - page 3
SF40A Printer Service Manual
SF40A Printer Service Manual
1-1
Ohaus Corporation www.ohaus.com
1.1 INTRODUCTION
This service manual contains the information needed to perform routine maintenance and
service on the Ohaus SF40A Printer. Familiarity with the printer
’s Instruction Manual is
assumed.
1.2 SERVICE FACILITIES
To service a printer, the service area should meet the following requirements:
Should be temperature controlled and meet
printer’s specifications for temperature
environmental requirements.
Area must be clean and free of excessive dust.
Work surface must be stable and level.
Printer must not be exposed to direct sunlight or radiating heat sources.
Use an approved Electro-Static Device.
1.3 TOOLS AND TEST EQUIPMENT REQUIRED
The service shop should contain the following equipment:
1. Standard hand tools.
2. Digital Voltmeter (DVM).
3. Standard Electronics tool kit.
4. Grounding mat and clip.