OHAUS SF40A Service Manual - page 4
of
8
SF40A Printer Service Manual
Ohaus Corporation www.ohaus.com
1-2
SF40A Printer Service Manual
1.4 Open Unit
1 Disconnect Line and Interface
Cables.
2 Remove Top Paper Cover and Paper
Roll/Rotary Axis.
3 Remove screw A and flip Top
Housing to the front.
4 Disconnect Keypad B.
1.5 Replace Print Head, Rubber pads
1 Open Unit, (see section 1.4).
2 Disconnect Print Head C from Main
PCB D.
3 Remove the ribbon cartridge E.
3 Loosen the 2 front screws, remove
the 2 rear screws and replace the
Print Head.
4 The Rubber Pads F are pressed
into their respective sockets. To
replace, pull pad off and press new
one into socket.
A
B
E
F
C
D