Oki 59502 User Manual - page 113
|
User’s Guide: English
113
During the programming sequence, the new default
combination is shown on the display panel.
The default settings are standard (STD) and normal (Normal).
Memory Full Save
Speed access no. 17
With features like group dialing, dialing starts after an entire
document or set of documents is read into memory.
When this function is set to ON, a message displays when
memory becomes full and an operator time out seems likely
during the dialing process.
When this function is set to OFF, data not read into memory
is deleted automatically.
When set to ON, and memory fills up, all but the last scanned
page can be sent to the specified location(s). The remaining
page(s) can then be sent as a separate communication.
Available settings are ON and OFF.
The default setting is OFF.
Instant Dial
Speed access no. 18
In the ON state, the document is scanned into memory and
dialing starts immediately. Although the function relies on
memory availability, connection to the remote location is
confirmed and the document transmitted faster when memory
is available. If it is set to OFF, the machine first confirms
contact with the remote location and then transmits the
document reading from the document tray (without scanning
into memory).
Available settings are ON and OFF.
The default setting is ON.
Restrict Access
Speed access no.19
This function controls whether or not machine operation is
restricted.
When set to ON (if restriction IDs have been programmed),
users must enter a password before being allowed access to
the machine’s functions.
When set to OFF, no password is required (even if restriction
IDs have been programmed).
Available settings are ON and OFF.
The default setting is OFF.