Oki 59502 User Manual - page 92
|
OKIFAX 5750/5950
92
Setting the Batch TX Time Function
!
Locations used for Delayed Batch Transmission
must be programmed into
Speed Dial numbers 31 through 40
before the Batch TX Time may be set.
1
Press Menu/Exit to enter the menu.
2
Press
to select Location Program. Press Enter.
3
Press
to select Batch TX Time. Press Enter.
4
Enter the Speed Dial number of the desired location.
Use the numeric keypad to enter the number.
Press Enter.
5
When prompted, enter the desired time.
Press Enter.
!
Use the 24-hour format to enter times.
For example, 0800 is 8:00 AM, 2000 is 8:00 PM.
Remember that delayed batch transmissions are sent at
the same time every day!
6
Press Menu/Exit to exit.
Send a Fax as Part of a Delayed Batch
1
Load the document(s).
2
Press Menu/Exit key to enter the menu.
3
Press
to select Delayed Batch TX, press Enter .
4
Enter the Speed Dial number of the desired location
using the assigned One Touch key or the numeric
keypad. Press Enter.
!
Locations used for Delayed Batch Transmission must
be programmed into Speed Dial numbers
31 through 40.
5
Location and transmission time set displays. Press Start.
6
The machine scans the document(s) into memory, and
waits until the programmed time to begin transmission.
7
Repeat above steps 1-7 to prepare multiple sessions.
!
Use the 24-hour format to enter times.
For example, 0800 is 8:00 AM, 2000 is 8:00 PM.
The amount of available memory determines how many
batch transmissions you may set. Once memory is filled,
no more sessions will be accepted.