Oki 59502 User Manual - page 27
|
User’s Guide: English
27
9
Resolution Key (Photo, Ex.fine, Fine, STD indicator
lights): Use this key to set the desired resolution of the
fax/copy after loading the document. Use the Photo
setting when the original document includes half-tone
images.
10 Type of Original Key (Dark, Normal, Light indicator
lights): Use this key to set the contrast after loading the
document. Use Light for originals that are too light,
Normal for originals with good contrast, and Dark for
originals that are too dark.
11 Clear Key: Use this key to cancel ID, telephone number
and programming entries.
12 Menu/Exit: Use this key to:
-
activate the Menu mode when the machine is in
standby state.
-
exit the mode and return to standby state.
13 */Tone Key: If the machine is set for pulse dialing,
pressing this key will switch from pulse to tone dialing
during the current call. This key can also be used during
programming to create numbers with mixed pulse-tone
operation.
14 0/Unique Key: Use this key as “0” when dialing
telephone numbers. When programming the Sender ID,
Location ID, etc., use this key to enter unique characters:
Symbols: ! # & ‘ ( ) * + , - . / : ; = ? ·
Internet characters: @ “ _ %
- l
The
- l
functions as a tilde symbol.
Umlaut characters: Ä ß Ñ Ö Ü
Norwegian characters: Æ Å Ø æ å ø
15 Numeric Keypad: These 12 keys work like the keypad
on a standard telephone when dialing a telephone
number. They are also used to move to another
operation mode, enter numbers, letters and other
characters when programming the machine, and input
speed dial numbers after pressing the Speed Dial key.
The “#” key is used for the creation of groups of
telephone numbers for batch transmission. After a
document is loaded, this key can also be used to select
previously programmed groups of telephone numbers for
faxing.
16 Redial Key: Press this key to automatically redial the
last telephone number dialed on the machine.