Oki B710 User Manual - page 32
of
51
Troubleshooting > 32
1.
Push the paper trays completely back into the printer.
2.
Open and close cover A. Doing this will clear the error message.
I
NSIDE
C
OVER
B
1.
Open the Duplex cover, if installed.
2.
Remove the rear tray when opening the back cover.
3.
Raise the lever as shown in the diagram and open the cover B (1).
4.
After opening cover B, open the cover of the fuser unit (2) and remove any jammed
paper.
5.
Close the fuser unit, cover B and then attach the rear tray.
6.
Close the duplex unit cover, if installed.
CAUTION!
The fuser unit is hot. You may get burned if you touch it directly.