1. DL manuals
  2. Oki
  3. Printer Accessories
  4. C610dn
  5. User Manual

Oki C610dn User Manual

Manual is about: Oki C610dtn: User Guide

Summary of C610dn

  • Page 1

    User’s guide c610/c711 59320301 my.Okidata.Com.

  • Page 2: – C610/c711

    2 – c610/c711 user’s guide copyright information copyright © 2009 by oki data. All rights reserved c610/c711 user’s guide p/n 59320301, revision 1.0 september, 2009 disclaimer every effort has been made to ensure that the information in this document is complete, accurate, and up-to-date. The manufa...

  • Page 3: – C610/c711

    3 – c610/c711 user’s guide emergency first aid take care with toner powder: if swallowed, give small amounts of cold water and seek medical attention. Do not attempt to induce vomiting. If inhaled, move the person to an open area for fresh air. Seek medical attention. If it gets into the eyes, flush...

  • Page 4: – C610/c711

    4 – c610/c711 user’s guide contents introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7 printer overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 c610 front view . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8...

  • Page 5: – C610/c711

    5 – c610/c711 user’s guide contents (cont.) available options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .67 duplex (two-sided printing) unit . . . . . . . . . . . . . . . . . . . . . . 67 additional ram memory . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67 sd ...

  • Page 6: – C610/c711

    6 – c610/c711 user’s guide notes, cautions and warnings note: a note appears in this manual like this. A note provides additional information to supplement the main text which may help you to use and understand the product. Caution! A caution appears in this manual like this. A caution provides addi...

  • Page 7: – C610/c711

    7 – c610/c711 user’s guide introduction your printer includes these features: • high definition color (hd color), multi-level technology produces more subtle tones and smoother gradations of color to lend photographic quality to your documents; • 600 x 600, 1200 x 600 dpi (dots per inch) and high de...

  • Page 8: – C610/c711

    8 – c610/c711 user’s guide printer overview ________________ c610 front view *the display language can be changed to show english, french, spanish or portuuese. 1. Output stacker, face down standard printed copy delivery point. Holds up to 250 sheets at 80 g/m². 2. Operator panel menu driven operato...

  • Page 9: – C610/c711

    9 – c610/c711 user’s guide c610 rear view this view shows the connection panel, the rear output stacker and the location of the optional duplex (two-sided printing) unit. * the network interface may have a protective “plug” which must be removed before connection can be made. When the rear paper sta...

  • Page 10: – C610/c711

    10 – c610/c711 user’s guide c711 front view *the display language can be changed to show english, french, spanish or portuuese. 1. Output stacker, face down standard printed copy delivery point. Holds up to 350 sheets at 80g/m². 2. Operator panel menu driven operator controls and lcd* panel. 3. Pape...

  • Page 11: – C610/c711

    11 – c610/c711 user’s guide c711 rear view this view shows the connection panel, the rear output stacker and the location of the optional duplex (two-sided printing) unit. * the network interface may have a protective “plug” which must be removed before connection can be made. When the rear paper st...

  • Page 12: – C610/c711

    12 – c610/c711 user’s guide changing the display language ____ the default language used by your printer for display messages and for report printing is english. If required, this can be changed to: • french • spanish • portuguese getting started _________________ power saving mode if you do not use...

  • Page 13: – C610/c711

    13 – c610/c711 user’s guide paper recommendations your printer will handle a variety of print media, including a range of paper weights and sizes, transparencies and envelopes. This section provides general advice on choice of media, and explains how to use each type. The best performance will be ob...

  • Page 14: – C610/c711

    14 – c610/c711 user’s guide tray 1 and optional trays 2 and 3___ media sizes media weight settings if you have identical paper stock loaded in another tray (2nd or 3rd tray if you have one, or multi purpose tray) you can set the printer to automatically switch to the other tray when the current tray...

  • Page 15: – C610/c711

    15 – c610/c711 user’s guide runs out of paper. When printing from windows applications, this function is enabled in the driver settings. When printing from other systems, this function is enabled in the print menu. (see “menu functions” on page 23 .) multi purpose tray ______________ the multi purpo...

  • Page 16: – C610/c711

    16 – c610/c711 user’s guide duplex unit ____________________ this option provides automatic two-sided printing on the same range of paper sizes as tray 2 (i.E. All cassette sizes except a6), using paper stocks from: • c610: 17-32 lb. Us bond (64-120 g/m²) • c711: 17-59 lb. Us bond (64-220 g/m²) note...

  • Page 17: – C610/c711

    17 – c610/c711 user’s guide loading paper tray 1 and optional trays 2 and 3___ 1. Remove the paper tray from the printer. 2. Fan the paper to be loaded at the edges (1) and in the middle (2) to ensure that all sheets are properly separated, then tap the edges of the stack on a flat surface to make i...

  • Page 18: – C610/c711

    18 – c610/c711 user’s guide 3. Load paper (letter headed paper face down and top edge towards the front of the printer), as shown. A b b c.

  • Page 19: – C610/c711

    19 – c610/c711 user’s guide 4. Adjust the rear stopper (a) and paper guides (b) to the size of paper being used. To prevent paper jams: • do not leave space between the paper and the guides and rear stopper. • do not overfill the paper tray. Capacity depends on the type of paper stock. • do not load...

  • Page 20: – C610/c711

    20 – c610/c711 user’s guide capacity is approximately 100 sheets of 20-lb. Us bond (75 g/m 2 ) paper. Caution! Do not open or close the rear paper exit while printing as it may result in a paper jam. A b.

  • Page 21: – C610/c711

    21 – c610/c711 user’s guide multi-purpose tray ________________________ 1. Open the multi purpose tray (a). 2. Fold out the paper supports (b). 3. Press gently down on the paper platform (c) to ensure it is latched down. 4. Load the paper and adjust the paper guides (d) to the size of paper being us...

  • Page 22: – C610/c711

    22 – c610/c711 user’s guide • for two-sided (duplex) printing on letterhead paper load the paper with pre-printed side down and top edge away from the printer. (optional duplex unit must be installed for this function.) • envelopes should be loaded face up with top edge to the left and short edge in...

  • Page 23: – C610/c711

    23 – c610/c711 user’s guide menu functions this section lists the menus accessed via the controls on the printer’s operator panel and displayed in the lcd window..

  • Page 24: – C610/c711

    24 – c610/c711 user’s guide operator panel: _______________ 1. Ready led on: ready to receive data. Blinking: processing data. Off: offline. 2. Display displays the printer status and any error messages. 3. Menu scroll buttons enters the menu mode. In menu mode, forwards or reverses the menu item di...

  • Page 25: – C610/c711

    25 – c610/c711 user’s guide 5. Attention led on: a warning occurs. Printing may be possible (e.G low toner). Blinking: an error occurs. Printing not possible (e.G. Toner empty). Off: normal condition. 6. Back button returns to the previous higher level menu item. 7. Enter button in the online or off...

  • Page 26: – C610/c711

    26 – c610/c711 user’s guide how to change the settings: user___ it should be noted that many of these settings can be, and often are, overridden by settings in the windows printer drivers. However, several of the driver settings can be left at “printer setting”, which will then default to the settin...

  • Page 27: – C610/c711

    27 – c610/c711 user’s guide how to change the settings: administrator __________________ you can set whether to enable or disable each category in the user menu. Disabled categories are not displayed in the user’s menu. Only a system administrator can change these settings. 1. Turn off the printer. ...

  • Page 28: – C610/c711

    28 – c610/c711 user’s guide menus ________________________ configuration menu item action explanation tray count tray1 tray 2* tray 3* mp tray *note: only available when optional trays are present select an item to display the total number of pages printed from the relevant tray. Supplies life cyan ...

  • Page 29: – C610/c711

    29 – c610/c711 user’s guide print information menu this menu provides a quick method of listing various items stored within the printer. System serial number asset number lot number cu version pu version total memory flash memory sd card date and time displays information for these items. A. Display...

  • Page 30: – C610/c711

    30 – c610/c711 user’s guide shutdown menu this item should always be selected before switching the printer off, to ensure that no data is lost. Epson fx font list execute scroll down to this parameter and select execute to print out an epson fx emulation font list. Usage report execute scroll down t...

  • Page 31: – C610/c711

    31 – c610/c711 user’s guide print secure job menu note: this menu only displays if the optional sd card is installed or on a c610hdn with a hard disk drive installed. Item action explanation encrypted job not found print delete used for printing an encrypted authentication print job (encrypted job) ...

  • Page 32: – C610/c711

    32 – c610/c711 user’s guide stored job not found print delete used to print out a stored job in the sd card. Not found will be displayed where a file, which could be printed is not available. The following message will appear if a printable file is available. Stored job print delete when print is se...

  • Page 33: – C610/c711

    33 – c610/c711 user’s guide menus menu item action explanation tray configuration paper feed default: tray 1 select tray. Select by scroll and enter button. Auto tray switch default: on switches auto on/off. Select by scroll and enter button. Tray sequence default: down selects tray sequence down/up...

  • Page 34: – C610/c711

    34 – c610/c711 user’s guide tray configuration (cont.) mp tray config paper size: • a4/a5/a6/b5 • legal14/legal 13.5/ legal13 • letter • executive • custom • com-9 envelope • com-10 envelope • monarch envelope • dl envelope • c5 • index card configure paper size/media type/media weight/tray usage. S...

  • Page 35: – C610/c711

    35 – c610/c711 user’s guide tray 2 config tray 3 config note: only present if option installed system adjust power save time default: 30 select from 1/2/3/4/5/10/15/ 30/60/120/180 minutes. Select by scroll and enter button. Sleep time default: 10 select from 1/2/3/4/5/10/15/ 30/60/120/180 minutes. S...

  • Page 36: – C610/c711

    36 – c610/c711 user’s guide system adjust (cont.) paper black setting –2/–1/0/+1/+2 default: 0 used for fine adjustment of the black print on paper. Paper color setting –2/–1/0/+1/+2 default: 0 used for fine adjustment of the color print on paper. Film black setting –2/–1/0/+1/+2 default: 0 used for...

  • Page 37: – C610/c711

    37 – c610/c711 user’s guide admin setup item settings explanation enter password xxxxxxxxxxxx enter a password to gain entry to the admin setup menu. Password should be from 6 to 12 digits of alpha/numeric characters (or mix) the default value is "aaaaaa" network setup tcp/ip enable disable sets tcp...

  • Page 38: – C610/c711

    38 – c610/c711 user’s guide network setup (cont.) netware enable disable sets enable/disable of netware protocol. Ethertalk enable disable sets enable/disable of ethertalk protocol. Frame type auto 802.2 802.3 ethernet ii snap sets the frame type. Display condition: netware should be enabled. Ip add...

  • Page 39: – C610/c711

    39 – c610/c711 user’s guide network setup (cont.) telnet enable disable sets enable/disable of telnet. Enable: telnet is available. Disable: telnet is not available. Display condition:tcp/ip should be enabled. Ftp enable disable sets enable/disable of ftp. Enable: ftp is available. Disable: ftp is n...

  • Page 40: – C610/c711

    40 – c610/c711 user’s guide network setup (cont.) factory defaults? Execute specifies whether to initialize the network factory default settings for the network. Print setup personality auto postscript pcl xps ibm ppr epson fx selects a printer language. Copies 1- 999 selects the number of copies. T...

  • Page 41: – C610/c711

    41 – c610/c711 user’s guide print setup (cont.) toner save mode on/off this function works effectively only if the data input is color rgb data. This setting is valid in ps and pcl, but does not take effect in the following cases. (1) ps: if color matching is set off. (2) ps: if any setting other th...

  • Page 42: – C610/c711

    42 – c610/c711 user’s guide print setup (cont.) edit size cassette size/ a4/a5/a6/b5/ legal14/ legal13.5/ legal13/letter/ executive/ custom/com-9 envelope/com- 10 envelope/ monarch envelope/dl envelope/c5/ index card sets the size of an area to draw when the host pc does not specify the size via the...

  • Page 43: – C610/c711

    43 – c610/c711 user’s guide ps setup (cont.) usb protocol ascii/raw specifies ps communication protocol mode of data from usb port. (in raw mode, ctrl-t is invalid). Ps models only. Pcl setup font source resident specifies the location of pcl default font. Font number i0 ~ i90 sets the pcl font numb...

  • Page 44: – C610/c711

    44 – c610/c711 user’s guide pcl setup (cont.) a4 print width 78 column 80 column sets the number of characters for a4 paper. Auto lf. This is for 10-cpi characters when auto cr/lf mode is set to off. This menu is enabled only when a4 paper is selected in the menu that sets the print width of a4 pape...

  • Page 45: – C610/c711

    45 – c610/c711 user’s guide pcl setup (cont.) white page skip on/off sets whether to eject a page without any data to print (blank page) upon reception of ff command (och) in pcl mode. Off: ejecting. Cr function cr/cr+lf sets action when cr code is received in pcl. Cr: carriage return cr+lf: carriag...

  • Page 46: – C610/c711

    46 – c610/c711 user’s guide pcl setup (cont.) pen width adjust on/off when minimum width is specified in pcl, sometimes a 1- dot line, looks broken. With pen width adjust set to on, when the minimum width is specified, the line width will be emphasized so as to look wider than a 1-dot line. With pen...

  • Page 47: – C610/c711

    47 – c610/c711 user’s guide ibm ppr setup (cont.) symbol set ibm 437 sets the symbol set for ibm ppr (see machine operator panel for complete list). Letter o style enable/disable specifies the style that replaces ø (9b) and ¥ (9d) with ø (ou) and Ø (zero). Zero character normal/ slashed specifies th...

  • Page 48: – C610/c711

    48 – c610/c711 user’s guide epson fx setup character pitch 10 cpi/12 cpi/ 17 cpi 20 cpi/ proportional specifies character pitch in epson fx emulation. Character set set-2 set-1 sets a character set. Symbol set ibm 437 sets the symbol set for epson fx emulation. (see machine operator panel for comple...

  • Page 49: – C610/c711

    49 – c610/c711 user’s guide color setup ink simulation off swop euroscale japan the machine has its own process simulation engine which simulates standard colors in the printer. This function is available only with ps language jobs. Ucr low medium high selects limitation to the toner layer thickness...

  • Page 50: – C610/c711

    50 – c610/c711 user’s guide memory setup receive buffer size auto 0.5 megabyte 1 megabyte 2 megabyte 4 megabyte 8 megabyte 16 megabyte 32 megabyte sets the size of receive buffer resource save auto off 0.5 megabyte 1 megabyte 2 megabyte 4 megabyte 8 megabyte 16 megabyte 32 megabyte sets the size of ...

  • Page 51: – C610/c711

    51 – c610/c711 user’s guide sd card setup this item is displayed only if the sd card (option) is installed. Initialize execute initializes the sd card to the factory default setting. Machine performs partition-division, and initializes each partition. When this menu is executed, the following confir...

  • Page 52: – C610/c711

    52 – c610/c711 user’s guide sd card setup (cont.) resize partition pcl nn%/ common mm%/ psll%/ specifies the size of partition. Specifies a size by ratio to the whole sd card in % (1% unit). Nn,mm,ll: 1 - 98 and nn+mm+ll=100 the sizes are displayed in the partition list and can be changed by selecti...

  • Page 53: – C610/c711

    53 – c610/c711 user’s guide sd card setup (cont.) format partition pcl common ps formats a specified partition. When the enter button is pressed, the following confirmation message appears. Are you sure? Yes/no no = return to the previous menu. Yes = execute now? Yes/no no = return to the previous m...

  • Page 54: – C610/c711

    54 – c610/c711 user’s guide time setup date format mm/dd/yyyy dd/mm/yyyy yyyy/mm/dd set desired date format. Time zone –12:00 ~ 0:00 ~ +13:00 enter the time zone for your country in relation to gmt. Set in quarter units within the range. Use the menu up/down buttons to increment/decrement and press ...

  • Page 55: – C610/c711

    55 – c610/c711 user’s guide settings reset settings execute resets eeprom of cu. Resets user menu to the factory default. If execute is selected, exits from the menu. Save settings execute saves menus currently set. With this function, the menus with which operation was last performed are saved, and...

  • Page 56: – C610/c711

    56 – c610/c711 user’s guide calibration item settings explanation auto density mode on/off selects whether density adjustment and trc compensation is automatically performed. On: density adjustment is automatically run under the engine-specified conditions, and reflected in trc compensation. Off: th...

  • Page 57: – C610/c711

    57 – c610/c711 user’s guide boot menu this menu should only be changed by the system administrators. In order to gain access to this menu, follow the instructions in “how to change the settings: administrator” on page 27 . This menu is in english only (default settings in bold type). Parallel setup ...

  • Page 58: – C610/c711

    58 – c610/c711 user’s guide bi-direction enable / disable enable/disable the bi-directional capability of the parallel interface. Ecp enable / disable extended capabilities port, enables/disables this function. Ack width narrow/ medium/ wide sets ack width for compatible reception. = 0.5 µs = 1.0 µs...

  • Page 59: – C610/c711

    59 – c610/c711 user’s guide usb setup this menu controls the operation of the printer’s usb data interface. When you have changed any settings in the usb menu, turn the printer off, then on again. Item settings explanation usb enable / disable enables / disables the usb port. Speed 480 / 12 mbps sel...

  • Page 60: – C610/c711

    60 – c610/c711 user’s guide security setup note: this menu only displays if the optional sd card is installed. Item settings explanation job limitations off encrypted job job limitation mode control. Jobs other than specified ones are rejected. Make secure sd card execute enables sd card encoding fu...

  • Page 61: – C610/c711

    61 – c610/c711 user’s guide make cipher key execute resets a cipher key to be used on an encrypted sd card. When this processing is done, all data stored on the sd card cannot be restored. After execution, the following confirmation messages will appear. Are you sure? Yes / no no = display returns t...

  • Page 62: – C610/c711

    62 – c610/c711 user’s guide storage setup note: this menu only displays if the optional sd card is installed. Item settings explanation check file system execute resolves mismatch between actual memory and displayed memory available in a file system. Performs administration data (fat information) re...

  • Page 63: – C610/c711

    63 – c610/c711 user’s guide enable initialization no yes prevents a setting change accompanying initialization of block device (sd card, flash). Item settings explanation.

  • Page 64: – C610/c711

    64 – c610/c711 user’s guide power setup language setup item settings explanation peak power control normal low sets peak power control level. Power save enable disable sets enable/disable of power save mode. Sleep enable disable sets enable/disable of sleep mode. Usb host power off on set power supp...

  • Page 65: – C610/c711

    65 – c610/c711 user’s guide print statistics item settings explanation enter password xxxx enters a password to enter print statistics menu. The default value is "0000". The password for entry to print statistics is different from the password for entry to functions-admin setup. “print statistics” c...

  • Page 66: – C610/c711

    66 – c610/c711 user’s guide reset group counter execute resets the group counter. When it executes, the following message appears. Are you sure? Yes / no when no is selected, it returns to original menu indication. When yes is selected, the group counter zero is cleared, the menu is passed through. ...

  • Page 67: – C610/c711

    67 – c610/c711 user’s guide available options see the instructions supplied with the options. Duplex (two-sided printing) unit ___ oki p/n 70061601 the duplex unit adds the function of two-sided printing, using less paper and making large documents easier to handle. It also enables booklet printing,...

  • Page 68: – C610/c711

    68 – c610/c711 user’s guide sd card _______________________ oki p/n 70061701 the optional sd card enables collating of printed pages and can be used to store overlays and macros, fonts, and secure or proof documents waiting to be printed. Installation takes a few minutes, and requires a medium size ...

  • Page 69: – C610/c711

    69 – c610/c711 user’s guide troubleshooting provided that you follow the recommendations in this guide on the use of print media, and you keep the media in good condition prior to use, your printer should give years of reliable service. However, paper jams occasionally do occur, and this section exp...

  • Page 70: – C610/c711

    70 – c610/c711 user’s guide major printer components and paper path 1. Duplex unit (if fitted). 6. Operator panel. 2. Face-up stacker. 7. Front cover. 3. Paper exit. 8. Paper tray. 4. Fuser unit 9. Additional paper tray (if fitted) 5. Top cover. 8 9 1 2 3 4 5 6 7.

  • Page 71: – C610/c711

    71 – c610/c711 user’s guide paper sensor error codes _________ * if fitted. Code # location code # location 370 duplex unit * 382 paper exit 371 duplex unit * 383 duplex unit * 372 duplex unit * 390 mp tray 373 duplex unit * 391 paper tray 380 paper feed 392 2 nd paper tray * 381 paper path 400 pape...

  • Page 72: – C610/c711

    72 – c610/c711 user’s guide clearing paper jams 1. If a sheet is well advanced out of the top of the printer, simply grip it and pull gently to draw it fully out. If it does not remove easily, do not use excessive force. It can be removed from the rear later. 2. Press the cover release and open the ...

  • Page 73: – C610/c711

    73 – c610/c711 user’s guide 3. Note the positions of the four toner cartridges (a) and image drums (b). It is essential that they go back in the same order. It will be necessary to remove the four image drums to gain access to the paper path. 4. Holding it by its top center, lift the image drum, com...

  • Page 74: – C610/c711

    74 – c610/c711 user’s guide 5. Put t he assembly down gently onto a piece of paper to prevent toner from marking your furniture and to avoid damaging the green drum surface, and cover. 6. Repeat this removal procedure for each of the remaining image drum units. Caution! The green image drum surface ...

  • Page 75: – C610/c711

    75 – c610/c711 user’s guide 7. Look into the printer to check whether any sheets of paper are visible on any part of the belt unit. • to remove a sheet with its leading edge at the front of the belt (a), carefully lift the sheet from the belt and pull it forwards into the internal drum cavity and wi...

  • Page 76: – C610/c711

    76 – c610/c711 user’s guide • to remove a sheet from the central area of the belt (b), carefully separate the sheet from the belt surface and withdraw the sheet. • to remove a sheet just entering the fuser (c), separate the trailing edge of the sheet from the belt, push the fuser pressure release le...

  • Page 77: – C610/c711

    77 – c610/c711 user’s guide (a) to remove a sheet in the fuser; push the two retaining levers (e) towards the rear of the printer to release the fuser. Withdraw the fuser unit using the handle (f). Press release lever (g) and pull the trapped paper from the fuser. E f e g.

  • Page 78: – C610/c711

    78 – c610/c711 user’s guide (b) replace fuser unit into the machine and move locking levers (e) toward the rear of the machine. E.

  • Page 79: – C610/c711

    79 – c610/c711 user’s guide 8. Starting with the cyan image drum unit nearest the fuser, replace the four image drums into the drum cavity, making sure to locate them in the correct order. Holding the complete assembly by its top center, lower it into place in the printer, locating the pegs at each ...

  • Page 80: – C610/c711

    80 – c610/c711 user’s guide 9. Lower the top cover but do not press down to latch it closed yet. This will protect the drums from excessive exposure to room lighting while you check the remaining areas for jammed sheets. 10. Open the rear exit tray (h) and check for a sheet of paper in the rear path...

  • Page 81: – C610/c711

    81 – c610/c711 user’s guide 12. If a duplex unit is fitted, lift lever (j) and lower the duplex unit cover and pull out any sheets found in this area. Close the duplex unit cover 13. Pull down the mp tray using the depressions. Lift the front cover release lever and lower the front cover. 14. Check ...

  • Page 82: – C610/c711

    82 – c610/c711 user’s guide 15. Pull out the paper tray and ensure that all paper is stacked properly, is undamaged, and that the paper guides are properly positioned against the edges of the paper stack. When satisfied, replace the tray. 16. Finally, close the top cover and press down firmly so tha...

  • Page 83: – C610/c711

    83 – c610/c711 user’s guide replacing consumables and maintenance items order information ______________ only use genuine oki original products to ensure the best quality and performance from your hardware. Non oki original products may adversely affect your printer's performance and invalidate your...

  • Page 84: – C610/c711

    84 – c610/c711 user’s guide toner cartridge replacement _____ have a sheet of paper handy so that you have somewhere to place the used cartridge while you install the new one. Dispose of the old cartridge responsibly, inside the pack that the new one came in. Follow any regulations, recommendations,...

  • Page 85: – C610/c711

    85 – c610/c711 user’s guide 1. Press the cover release and open the printer’s top cover fully. 2. Note the positions of the four cartridges. Warning if the printer has been powered on, the fuser may be hot. This area is clearly labelled. Do not touch. 1. Cyan 2. Magenta 3. Yellow 4. Black 6 1 2 3 4.

  • Page 86: – C610/c711

    86 – c610/c711 user’s guide (a) pull the colored toner release lever on the cartridge to be replaced fully towards the front of the printer. (b) lift the right-hand end of the cartridge and then draw the cartridge to the right to release the left-hand end as shown, and withdraw the toner cartridge o...

  • Page 87: – C610/c711

    87 – c610/c711 user’s guide 5. Remove the new cartridge from its box but leave its wrapping material in place for the moment. 6. Gently shake the new cartridge from end to end several times to loosen and distribute the toner evenly inside the cartridge. 7. Remove the wrapping material and peel off t...

  • Page 88: – C610/c711

    88 – c610/c711 user’s guide 9. Insert the left end of the cartridge into the top of the image drum unit first, pushing it against the spring on the drum unit, then lower the right end of the cartridge down onto the image drum unit. 10. Pressing gently down on the cartridge to ensure that it is firml...

  • Page 89: – C610/c711

    89 – c610/c711 user’s guide 11. Gently wipe the led head surface with a clean, lint free cloth. 12. Finally, close the top cover and press down firmly at both sides so that the cover latches closed..

  • Page 90: – C610/c711

    90 – c610/c711 user’s guide image drum replacement. ________ the printer contains four image drums: cyan, magenta, yellow and black. 1. Press the cover release and open the printer’s top cover fully. Caution! Static sensitive devices, handle with care. Warning! If the printer has been powered on, th...

  • Page 91: – C610/c711

    91 – c610/c711 user’s guide 2. Note the positions of the four toner cartridges (a) and image drums (b). It is essential that they go back in the same order. A b.

  • Page 92: – C610/c711

    92 – c610/c711 user’s guide 3. Holding it by its top centre, lift the image drum, complete with its toner cartridge, up and out of the printer. 4. Put the assembly down gently onto a piece of paper to prevent toner from marking your furniture and to avoid damaging the green drum surface. Caution! Th...

  • Page 93: – C610/c711

    93 – c610/c711 user’s guide 5. With the colored toner release lever (1) to the right, pull the lever towards you. This will release the bond between the toner cartridge and the image drum unit. 6. Lift the right-hand end of the toner cartridge (1) and then draw the cartridge to the right to release ...

  • Page 94: – C610/c711

    94 – c610/c711 user’s guide 8. Place the toner cartridge onto the new image drum cartridge as shown. Push the left end in first, and then lower the right end in. (it is not necessary to fit a new toner cartridge at this time unless the remaining toner level is very low.) 9. Push the colored release ...

  • Page 95: – C610/c711

    95 – c610/c711 user’s guide 10. Holding the complete assembly by its top center, lower it into place in the printer, locating the pegs at each end into their slots in the sides of the printer cavity. 11. Finally, close the top cover and press down firmly at both sides so that the cover latches close...

  • Page 96: – C610/c711

    96 – c610/c711 user’s guide replacing the transfer belt unit ____ the belt unit is located under the four image drums. Switch off the printer and allow the fuser to cool for about 10 minutes before opening the cover. 1. Press the cover release and open the printer’s top cover fully. 2. Note the posi...

  • Page 97: – C610/c711

    97 – c610/c711 user’s guide 3. Lift each of the image drum units out of the printer and place them in a safe place away from direct sources of heat and light. Caution! The green image drum surface at the base of each cartridge is very delicate and light sensitive. Do not touch it and do not expose i...

  • Page 98: – C610/c711

    98 – c610/c711 user’s guide 4. Locate the two fasteners (a) at each side of the belt and the lifting bar (b) at the front end. 5. Turn the two fasteners 90° to the left. This will release the belt from the printer chassis. 6. Pull the lifting bar (b) upwards so that the belt tilts up towards the fro...

  • Page 99: – C610/c711

    99 – c610/c711 user’s guide 7. Lower the new belt unit into place, with the lifting bar at the front and the drive gear towards the rear of the printer. Locate the drive gear into the gear inside the printer by the rear left corner of the unit, and lower the belt unit flat inside the printer..

  • Page 100: 100

    100 – c610/c711 user’s guide 8. Turn the two fasteners (a) 90° to the right until they lock. This will secure the belt unit in place. 9. Replace the four image drums, complete with their toner cartridges, into the printer in the same sequence as they came out: cyan (nearest the rear), magenta, yello...

  • Page 101: 101

    101 – c610/c711 user’s guide fuser replacement ______________ the fuser is located inside the printer just behind the four image drum units. 1. Press the cover release and open the printer’s top cover fully. 2. Identify the fuser handle ( a ) on the top of the fuser unit. Warning if the printer has ...

  • Page 102: 102

    102 – c610/c711 user’s guide 3. Pull the two fuser retaining levers (b) towards the front of the printer so that they are fully upright. 4. Holding the fuser by its handle (a), lift the fuser straight up and out of the printer. If the fuser is still warm, place it on a flat surface which will not be...

  • Page 103: 103

    103 – c610/c711 user’s guide 8. Push the two retaining levers (b) towards the rear of the printer to lock the fuser in place. 9. Finally, close the top cover and press down firmly at both sides so that the cover latches closed. B.

  • Page 104: 104

    104 – c610/c711 user’s guide cleaning the led head ___________ clean the led heads when printing does not come out clearly, has white lines or when text is blurred. There is no need to switch off the printer to clean the lens. 1. Press the cover release and open the printer’s top cover fully. 2. Ope...

  • Page 105: 105

    105 – c610/c711 user’s guide 3. Gently wipe the led head surface with a clean, lint free cloth. 4. Close the top cover and press down firmly at both sides so that the cover latches closed. Caution! Do not use methyl alcohol or other solvents on the led head as damage to the lens surface will occur..

  • Page 106: 106

    106 – c610/c711 user’s guide utilities summary of utilities provided________ utilities on the cd for more information, click “tell me more” on the optional utilities screen. Windows • admin manager for quick discovery and setup of the oki network card in your printer. Runs directly off the cd. • dir...

  • Page 107: 107

    107 – c610/c711 user’s guide download pcl macros, postscript forms and bar codes to the printer hard disk drive for use in print jobs • swatch utility print a color swatch and use the indicated rgb values to set up the color(s) of your choice in your graphics/design software application. • ps gamma ...

  • Page 108: 108

    108 – c610/c711 user’s guide • ps gamma adjuster permits adjustment of each of the primary colors that the printer uses in postscript mode. Installing the utilities ____________ utilities on the cd load the utilities from the menu installer located on the cd supplied with your printer. Download util...

  • Page 109: 109

    109 – c610/c711 user’s guide specifications specifications are subject to change without notice. Item specification dimensions c610: 17.1” w x 21.5” d x 13.4” h (435 x 547 x 340 mm) without duplex unit c711: 17.1” w x 21.5” d x 15.3” h (435 x 547 x 389 mm) without duplex unit weight c610: 57.3 lbs. ...