Oki DP-5000 Metallic and Colour Desktop Printer Setup Manual - page 15
English
Setup Guide
11
Usage guidelines
Caution:
Use dye sublimation ink cartridges only with dye sublima-
tion paper. Failure to do so can damage the printer and the
ink cartridge ribbon. Refer to the User Guide for more in-
formation.
Refer to the following table for guidelines on using the
different types of ink cartridges that are available.
Loading Paper
IMPORTANT:
DO NOT USE INK JET PAPER WITH THIS PRINTER.
Doing so will result in poor print qualilty and damage to
the printer. Ink jet paper is coated and is not compatable
with the DP-5000 printer.
Note:
When loading paper, use only one type of paper at a
time .
There are two modes of paper feeding; automatic and
manual. Use automatic feed mode for continuous print-
ing as follows:
Colours
& Coatings
Printing Mode
Properties
Cyan, Magenta,
Yellow, Black
Standard
VPhoto
Inks are resin based. Fade resistant,
waterproof and smudgeproof
VPhoto Primer
Standard
VPhoto
Paper primer. Printing at 2400 dpi on
plain paper in VPhoto mode.
Finish II
Standard
VPhoto
Glossy finish to prints. Software
selectable; glossy and matt finishes
on the final image.
Gold and Silver
foil
Standard
VPhoto
Glossy foil, metallic text and graph-
ics on plain paper or other media
ideal for spot text, graphics or logos.
Econoblack
Standard
Low cost black and white text proof
printing at lower quality than stand-
ard black.
White
Standard
Applied in a similar way to foil col-
ours. Primer base for coloured
media or as a spot colour on OHT
film.
Cyan, Magenta,
Yellow, Black,
Overcoat
Dye
Sublimation
For use only with dye sublimaton
upgrade kit. Dye sublimation inks
offer continuous tone photographic
quality results. Overcoat ink acts as
a protective cover for the other inks.
Colours
& Coatings
Printing Mode
Properties