Oki MC361MFP Setup Manual - Locate The Setup Form

22 - English

Locate the Setup Form

You will find a Setup Form on page 54. You can 

use this form to record needed information about 

your network settings, then refer to it when 

setting up the machine for network operation.

Set the Administrative 

Password

Note

When using the arrow keys to make your 

selections, press the key repetitively to go to the 

selection.

1

Press  on the control panel. 

2

Use the down arrow key to select [Admin 

Setup], then press .

3

Use the down arrow key to select [a], then 

press  six times to enter the default 

password: aaaaaa.

4

Use the arrow keys to select [Enter] on the 

display, then press .

5

Use the up arrow key to select 

[Management], then press .

6

Use the up arrow key to select [Admin 

Password], then press .

7

Use the arrow keys to select the digits of your 

password, pressing  after each digit.

8

When done entering your new password, use 

the arrow keys to select Enter on the display, 

then press .

Note

The Admin Password must have at least six digits 

and is case sensitive.

9

When you have entered all the digits, use the 

arrow keys to select [Enter] on the display, 

then press .

10

Use the left arrow key to back out to the main 

screen.

11

Enter the Admin Password on line A-1 of the 

Setup Form.

Set Up the Network for 

Windows Systems

To complete the network connection with a 

Windows computer, first set IP addresses for the 

computer and the machine, and then install 

printer driver(s) on the computer.