Oki Microline 182 Maintenance Manual - Parts Replacement

3.

3.1

PARTS REPLACEMENT

Precautions for Parts Replacement

Be sure to turn OFF the AC POWER switch and remove the 

 plug from the AC

receptacle before disassembly or 

 not disassemble the printer as long as it is in good 

Be careful not to remove parts unless, necessary. Disassembly should be the minimum

necessary.

Use only the specified maintenance 

Disassemble the printer in the specified order of disassembly procedures; otherwise,

parts may be damaged.

In the course of disassembly, it may be 

 keep the removed small parts such

as screws and washers by attaching them temporarily to their original places so as not to

lose them.

 such as the microprocessor, ROM, and RAM can easily be damaged by static

electricity. Do not wear gloves that are apt to produce static electricity when handling

printed-circuit boards.

Do not place the printed-circuit boards directly on the printer or the floor.

3 - l