Oki Microline 182 Maintenance Manual - page 30
Other manuals for Microline 182:
Handbook
Manual is about: OKI Printer
of
210
3.2.8
Space motor assembly
Remove the upper cover (see 3.2.1).
Remove the print head (see 3.2.6).
Remove the ribbon feed gear assembly (see 3.2.7).
Remove connector
and observe concave surface.
Remove three screws
Remove space motor assembly
For reassembly, reverse the disassembly procedure.
2.
3.
4.
Notes:
Do not touch the space motor assembly
terminal (contact)
with hand
and make sure that if is clean.
When installing space motor assembly
put the
side of the assembly close
carriage frame
and align the
side of
assembly with the corresponding side
of the carriage frame.
When installing slider
put
and
of
slider close to space motor
assembly
space
checkandadjusf fhegap between
and print head (see section 5).
3 - 1 6