Oki Microline 182 Maintenance Manual - page 16
Other manuals for Microline 182:
Handbook
Manual is about: OKI Printer
of
210
3.2
3.2.1
Disassembly and Reassembly
Upper cover
Turn OFF the AC POWER switch, and remove AC cable
from the outlet, and then
remove
interface cable
remove paper.
Remove acoustic cover and paper separator (if installed).
Remove tractor feed unit
by depressing lock lever
and tilting backward (if it is
installed).
Remove roll paper with paper shaft
by lifting upward. Remove side frame
by
tilting forward (if it is installed).
Remove access cover
by lifting rear, edge.
Pull platen knob
out
Remove two screws’@.
Remove upper cover
by lifting up front and pushing it backward.
For reassembly, reverse the disassembly procedure.
3 - 2