1. DL manuals
  2. Oki
  3. Printer
  4. MPS9650c
  5. User Manual

Oki MPS9650c User Manual

Summary of MPS9650c

  • Page 1

    User’s guide 59319201 my.Okidata.Com mps9650c.

  • Page 2

    Mps9650c user’s guide 2 copyright information copyright © 2009 by oki data. All rights reserved document information ________________________________ mps9650c user’s guide p/n 59319201 revision 1.0 auust, 2009 disclaimer__________________________________________ every effort has been made to ensure ...

  • Page 3: Ontents

    Mps9650c user’s guide> 3 c ontents notes, cautions and warnings! . . . . . . . . . . . . . . . . 6 safety warnings . . . . . . . . . . . . . . . . . . . . . . . . . . 6 introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 features . . . . . . . . . . . . . . . . . . . . . . . . ...

  • Page 4

    Mps9650c user’s guide> 4 connecting the parallel interface . . . . . . . . . . . 47 connecting the usb interface . . . . . . . . . . . . . 47 connecting the network interface . . . . . . . . . . 48 using the drivers cd . . . . . . . . . . . . . . . . . . . . . 49 operation . . . . . . . . . . . . . ...

  • Page 5

    Mps9650c user’s guide> 5 appendix b – menu system . . . . . . . . . . . . . . . . 106 configuration. . . . . . . . . . . . . . . . . . . . . . . . . . .107 print page count . . . . . . . . . . . . . . . . . . . . . .107 finisher count . . . . . . . . . . . . . . . . . . . . . . . .107 supplies life ...

  • Page 6: Otes

    Mps9650c user’s guide> 6 n otes , cautions and warnings ! Note a note provides additional information to supplement the main text. S afety warnings please be careful to read and understand the safety warnings on the following pages before operating the printer. Illustrations illustrations and compon...

  • Page 7: Warning!

    Mps9650c user’s guide> 7 warning! Ensure all warning and instruction labels on the product are read, understood and followed in order to prevent any risk of injury. Ensure this and all other documentation is both read carefully and retained for future reference. This printer unit weighs 167.5 lbs (7...

  • Page 8: Warning!

    Mps9650c user’s guide> 8 warning! This product has an earthed plug as a safety feature and will only connect to an earthed socket. Do not attempt to defeat the earthing or there is a risk of fire or shock. If using an extension cable or power strip ensure that the total current rating (amperes) of a...

  • Page 9: Warning!

    Mps9650c user’s guide> 9 warning! Use only the power cable supplied. Using a power cable not intended for this product may lead to fire or electric shock. To avoid risk of fire and electric shock, do not use the power cable supplied with this product for any other electrical equipment. If you do not...

  • Page 10: Warning!

    Mps9650c user’s guide> 10 warning! If any liquid (for example water) is allowed to enter the printer, there is a risk of fire. Unplug the mains connector and contact your dealer. Do not place containers containing liquid on the printer as electric shock, fire and/or injuries may occur. If any foreig...

  • Page 11: Warning!

    Mps9650c user’s guide> 11 warning! Risk of explosion if battery is replaced by an incorrect type. Do not touch the battery. Printer battery should not require replacement during the life of the printer. After installing additional memory or a hard disk drive, the cover door must be closed and secure...

  • Page 12: Ntroduction

    Mps9650c user’s guide> 12 i ntroduction congratulations on buying an oki color printer. Your new printer is designed with advanced features to give you clear, vibrant color prints and crisp black and white pages at high speed on a range of print media for the office. There are three different models...

  • Page 13

    Mps9650c user’s guide> 13 additionally, the following optional features are available: > automatic two-sided (duplex) printing for economical use of paper and compact printing of larger documents note this optional feature is only applicable to the c9600n. > hard disk drive enables spooled and verif...

  • Page 14

    Mps9650c user’s guide> 14 a bout this guide note images used in this manual may include optional features that your printer does not have installed. This manual is your user’s guide (check the web site, my.Okidata.Com, for the most up-to-date version) for your printer and forms part of the overall u...

  • Page 15

    Mps9650c user’s guide> 15 > online help: online information accessible from the printer driver and utility software. S oftware supplied cds: > drivers and utilities contains drivers and application software for use by a general user. > network and administrator utilities contains software for use by...

  • Page 16

    Mps9650c user’s guide> 16 o nline usage this guide is intended to be read on screen using an adobe acrobat reader. Use the navigation and viewing tools provided in acrobat. You can access specific information in two ways: > in the list of bookmarks down the left hand side of your screen, click on th...

  • Page 17

    Mps9650c user’s guide> 17 (c) [pages from] and [to], (3), for the range of pages you specify by entering their page numbers. 3. Click on [ok]..

  • Page 18: Rinter

    Mps9650c user’s guide> 18 p rinter and paper overview o pening and closing the top cover to open the top cover, squeeze the top cover handle (1) to release the catch and raise the cover. Caution! To gain access to the inside of the printer, ensure that the top cover is fully opened. 1.

  • Page 19

    Mps9650c user’s guide> 19 to close the top cover, push gently (1) until the cover stops midway and then push harder (2) to close the cover completely. Ensure that the cover is securely closed. I dentifying major components the major components of your printer are identified in the graphics below. 1....

  • Page 20

    Mps9650c user’s guide> 20 9. Top cover handle 10. Face-down stacker 11. Power (on/off) switch 1 2 3 4 5 6 7 8 9.

  • Page 21

    Mps9650c user’s guide> 21 12. Face-up stacker 13. Interface unit 14. Network interface connector 10 11 12.

  • Page 22

    Mps9650c user’s guide> 22 15. Parallel interface connector 16. Usb interface connector 17. Power connector 18. Ventilation openings 19. Image drum cartridge and toner cartridge (cyan) 20. Image drum cartridge and toner cartridge (magenta) 13 17 18 14 15 16.

  • Page 23

    Mps9650c user’s guide> 23 21. Image drum cartridge and toner cartridge (yellow) 22. Image drum cartridge and toner cartridge (black) 23. Toner cartridge 24. Image drum cartridge 25. Fuser unit 26. Led heads 27. Belt unit 28. Drum basket handle 19 20 21 22 23 24 25 26.

  • Page 24

    Mps9650c user’s guide> 24 29. Drum basket 27 28 29.

  • Page 25

    Mps9650c user’s guide> 25 p aper recommendations your printer will handle a variety of print media, including a range of paper weights and sizes, transparencies and envelopes. This section provides general advice on choice of media, and explains how to use each type. The best performance will be obt...

  • Page 26

    Mps9650c user’s guide> 26 p aper input and output information the following table relates paper parameters to input trays (tray 1 to tray 5 (numbering from the top) and mp tray) and to output areas (face-down stacker and face-up stacker). Type size weight input/ output plain paper a3, a3 nobi, a3 wi...

  • Page 27

    Mps9650c user’s guide> 27 t rays and stackers t rays 1 to 5 tray 1 is the standard blank paper input tray and can hold up to 530 sheets of 20 lb (75 g/m²) paper. Additional trays, to give a total of five, can be added as an option to give a total tray capacity of 2650 sheets of 20 lb (75 g/m²) paper...

  • Page 28

    Mps9650c user’s guide> 28 f ace - down stacker the face-down stacker on the top of the printer can hold up to 500 sheets of 20 lb (80 g/m²) standard paper, and can handle paper stocks from 17 – 57 lb (64 – 216 g/m²). Pages printed in reading order (page 1 first) will be sorted in reading order (last...

  • Page 29

    Mps9650c user’s guide> 29 t ray and stacker examples l oading t rays 1 to 5 tray 1 is used in the following example. 1. Pull out the tray. 2. Press the paper rear stopper tab (1) and adjust the tab to the required paper size. 3. Fan the paper to be loaded then tap the edges of the stack on a flat su...

  • Page 30

    Mps9650c user’s guide> 30 4. Load the paper (face down and top edge towards the right for letterhead paper), press the tab (2) on the paper guide and adjust the guides (3) for a snug fit to the paper. To avoid paper jams: • do not leave space between the paper and the guides and rear stopper. • do n...

  • Page 31: Mp T

    Mps9650c user’s guide> 31 5. Gently push the tray back into the printer. U sing the mp t ray 1. Squeeze the handle (1) and open the multi-purpose tray. 1.

  • Page 32

    Mps9650c user’s guide> 32 2. Fold out the paper support section and swivel out the extension supports (2). 3. Adjust the paper guides (3) to the size of the paper being used. 4. Fan the paper to be loaded then tap the edges of the stack on a flat surface to make it flush. 5. Load the paper. • for si...

  • Page 33

    Mps9650c user’s guide> 33 the printer. (the duplex unit must be installed for this function.) • envelopes should be loaded face-up with long edge into the printer. Do not select duplex printing on envelopes. • do not leave space between the paper and the guides. • do not exceed the paper capacity of...

  • Page 34

    Mps9650c user’s guide> 34 u sing the stackers face-down stacker when the face-up stacker (1) on the left side of the printer is closed (its normal position), paper is ejected to the face-down stacker on the top of the printer. Face-up stacker the face-up exit path is used for heavy paper (cardstock ...

  • Page 35

    Mps9650c user’s guide> 35 2. Flip out the paper support (2). 3. Swivel out the paper support extension (3). 2 3.

  • Page 36: Ontrol

    Mps9650c user’s guide> 36 c ontrol panel the control panel can be swivelled to 90° (maximum) upwards from its base position (1) as required for ease of use. B uttons and lights the parts of the control panel are identified and briefly explained below: 1. Shutdown/restart button hold down for more th...

  • Page 37

    Mps9650c user’s guide> 37 2. Ready light on: indicates ready to print flashing: indicates processing print data off: indicates unable to receive data (offline) 3. Attention light off: indicates normal operation flashing: indicates error(s) present but printing can continue on: indicates error(s) pre...

  • Page 38

    Mps9650c user’s guide> 38 d isplay p anel messages there are four types of display panel message: > status information > menu (functions) information > configuration information > help information s tatus information status information is associated with three printer states: in the information stat...

  • Page 39

    Mps9650c user’s guide> 39 restart). Available to support staff to allow printer configurations and special functions to be set. C onfiguration information configuration information displays printer configuration information such as internal firmware versions. Menu options at each level can be scroll...

  • Page 40

    Mps9650c user’s guide> 40 the steps involved in using the menus are typically as follows: 1. Ensure that the display panel indicates that the printer is ready to print. 2. Enter user menu mode by pressing either the enter button or the up-arrow or down-arrow button and press the latter two repeatedl...

  • Page 41: Etting

    Mps9650c user’s guide> 41 g etting started this section provides information to help you get started with using your printer. P rinter location check that you have sufficient space for access: > around your printer: 60cm 60cm 20cm 8in 100cm 40in 24in 24in.

  • Page 42

    Mps9650c user’s guide> 42 > above your printer: t urning o ff /o n t urning o ff no hard disk drive installed 1. If a hard disk drive is not installed, use the on/off switch. 70cm 28in.

  • Page 43

    Mps9650c user’s guide> 43 hard disk drive installed 1. If your printer has a hard disk drive installed, hold down the shutdown/restart button (1) on the control panel for more than 2 seconds to start the shutdown process. 2. When the display panel shows that you can either turn off or restart the pr...

  • Page 44

    Mps9650c user’s guide> 44 t urning o n note if the display panel shows that you can either turn off or restart the printer, press shutdown/restart to turn on the printer. 1. If the printer is turned off (no power), use the on/off switch to turn on the printer. C hanging the display language the defa...

  • Page 45

    Mps9650c user’s guide> 45 c hecking current settings carry out the following steps to generate a configuration report (menu map) to confirm that your printer is correctly configured. 1. Ensure that there is letter paper in tray 1 (to be used in this operation). 2. Ensure that the display panel indic...

  • Page 46

    Mps9650c user’s guide> 46 i nterfaces and connection your printer is equipped with a selection of data interfaces: > parallel – for direct connection to a pc. This port requires a bi-directional (ieee 1284 compliant) parallel cable. > usb – this port requires a cable conforming to usb version 2.0 or...

  • Page 47: Usb

    Mps9650c user’s guide> 47 c onnecting the parallel interface 1. Turn off the printer and the computer. 2. Connect a parallel cable between the printer and computer. 3. Turn on the printer and then the computer. C onnecting the usb interface do not connect the usb cable at this time. You will be inst...

  • Page 48: Caution!

    Mps9650c user’s guide> 48 c onnecting the network interface 1. Turn off the printer and the computer. 2. Install the ferrite core to the ethernet cable as shown. Caution! Do not connect a usb cable into the network interface connector as this may lead to malfunction..

  • Page 49

    Mps9650c user’s guide> 49 3. Connect an ethernet cable between the printer and an ethernet hub. 4. Turn on the printer and then the computer. If your printer is to be installed as a network printer, please refer to the relevant section in the software installation guide and configuration guide for f...

  • Page 50: Peration

    Mps9650c user’s guide> 50 o peration u sing the printer for full details of how to use the printer and any optional accessories to print jobs efficiently and effectively, please refer to the printing guide..

  • Page 51: Onsumables

    Mps9650c user’s guide> 51 c onsumables and maintenance this section explains how to replace consumable and maintenance items when due. As a guide, the life expectancy of these items is: > black toner — 18,500 letter pages at 5% coverage. > cyan, magenta, yellow toner— 16,500 letter pages at 5% cover...

  • Page 52: Led

    Mps9650c user’s guide> 52 r eplacing consumables / maintenance items each consumable or maintenance item comes complete with its own installation details which give full instructions on replacement. You are advised to follow these instructions carefully. C leaning the led heads you are advised to cl...

  • Page 53

    Mps9650c user’s guide> 53 2. With an led lens cleaner or soft cloth, gently wipe each of the four heads (1). Move the cleaner as shown, using a clean section of the cleaner with each pass. Be careful not to damage the guards (2). 3. Close the top cover. 1 2.

  • Page 54

    Mps9650c user’s guide> 54 c leaning the paper feed rollers clean the paper feed rollers if paper jams frequently occur. 1. Remove items like a wrist watch or bracelet and follow the correct steps to turn the printer off depending on whether a hard disk drive is installed. 2. Open tray 1 side cover a...

  • Page 55

    Mps9650c user’s guide> 55 3. Remove tray 1 completely from the printer. 4. Gaining access through the gap left by tray 1, wipe the 3 paper feed rollers (2) with a soft cloth lightly moistened with water. 5. Replace tray 1. 2.

  • Page 56

    Mps9650c user’s guide> 56 6. Return the paper guide plate to its original position and close tray 1 side cover. 7. Turn on the printer..

  • Page 57

    Mps9650c user’s guide> 57 c leaning the printer casing 1. Follow the correct steps to turn the printer off depending on whether a hard disk drive is installed. 2. Wipe the printer surface with a soft cloth moistened sparingly with water or neutral detergent. 3. Use a soft dry cloth to dry the printe...

  • Page 58

    Mps9650c user’s guide> 58 4. Turn on the printer. E mptying the punch chip box (p unch unit optional accessory ) when the display panel indicates that the punch chip box is full, empty the box as follows: 1. Operate the finisher lever and move the finisher away from the printer..

  • Page 59

    Mps9650c user’s guide> 59 2. Pull out the punch chip box, being careful to keep it level so as not to spill any chips. 3. Discard the chips in an appropriate place. 4. Replace the punch chip box carefully into the finisher..

  • Page 60

    Mps9650c user’s guide> 60 5. Check that the punch chip box has been replaced correctly then move the finisher back into position, being careful not to trap your fingers..

  • Page 61: Ptional

    Mps9650c user’s guide> 62 o ptional accessories this section describes optional accessory equipment for your printer. The following accessories are available: > duplex unit (to enable two-sided printing) (c9600n only) > additional ram memory > hard disk drive (required for verified and spooled print...

  • Page 62

    Mps9650c user’s guide> 63 a ccessory order information item order number duplex unit 42797201 additional ram memory 256 mb 512 mb 70050301 70050401 hard disk drive 70050501 second, third paper tray 42831301 high capacity feeder (hcf) 42831501 finisher: 4-tray 5-tray 42940201 42872701 finisher punch ...

  • Page 63

    Mps9650c user’s guide> 64 i nstalling accessories each accessory (apart from the finisher) comes complete with its own documentation which gives full instructions on installation. You are advised to follow these instructions carefully. After installation, print out a menu map (configuration document...

  • Page 64: Roubleshooting

    Mps9650c user’s guide> 65 t roubleshooting g eneral if the printer display panel does not display anything or is still in stand-by mode 10 minutes after switching on, follow the printer shutdown sequence to switch it off. Check all cable connections before restarting the printer. If the problem pers...

  • Page 65

    Mps9650c user’s guide> 66 1. Squeeze the catch (1) on tray 1 side cover and open the cover. 2. Holding it by the tab (2), turn the paper guide outward. 3. Carefully remove the jammed paper. 2.

  • Page 66

    Mps9650c user’s guide> 67 4. Put the paper guide back into position and close tray 1 side cover. O pen cover , paper jam , side cover 1. If the mp tray is open, close it so that the side cover (1) is visible. 1.

  • Page 67

    Mps9650c user’s guide> 68 2. Pull the release lever (2) and pull open the side cover. 3. Carefully remove the jammed paper. 2.

  • Page 68: Warning!

    Mps9650c user’s guide> 69 4. Close the side cover. O pen cover , paper jam , top cover 1. Squeeze the top cover handle (1) and open the top cover. Warning! Be careful not to touch the fuser unit which is hot after printing. 1.

  • Page 69: Warning!

    Mps9650c user’s guide> 70 2. Squeeze the basket handle (2) and raise the drum basket. 3. Carefully remove any paper on the belt. 4. If paper is jammed in the fuser unit, push the lock lever (3) in the direction shown to release the unit. Warning! Be careful not to touch the fuser unit which may be h...

  • Page 70

    Mps9650c user’s guide> 71 holding the fuser unit (4) by the handle, lift it out of the printer and place it on a flat surface. 5. Pull up the jam release levers (5) and remove the jammed paper. 4 3 5.

  • Page 71

    Mps9650c user’s guide> 72 6. Carefully replace the fuser unit into the printer and turn the lock lever (6) in the direction shown to lock the fuser unit. 7. If paper is jammed near the paper exit, open the face-up stacker (7). 6 7.

  • Page 72

    Mps9650c user’s guide> 73 8. Open the side cover (paper exit) (8) and remove the jammed paper. 9. Close the side cover (paper exit) and then the face-up stacker. 8.

  • Page 73

    Mps9650c user’s guide> 74 10. Return the image drum basket (9) into position and check it is locked. 11. Close the top cover and ensure it is latched. 9.

  • Page 74: –

    Mps9650c user’s guide> 75 p aper jams – duplex unit ( if installed ) c heck duplex unit , paper jam 1. If a finisher unit is attached to your printer, operate the lever (1) of the inverter unit to separate the inverter from the printer. 2. Operate the duplex cover release button (2) and open the cov...

  • Page 75

    Mps9650c user’s guide> 76 3. Carefully remove any jammed paper. 4. Operate the levers (3) and pull out the duplex unit. 3 3.

  • Page 76

    Mps9650c user’s guide> 77 5. Holding the front top cover by the grip (4), push it gently inwards and raise it. 6. Remove any jammed paper. 4.

  • Page 77

    Mps9650c user’s guide> 78 7. In similar manner, check for and clear any paper jammed under the rear top cover. 8. Replace the two top covers..

  • Page 78

    Mps9650c user’s guide> 79 9. Raise the front cover of the duplex unit. 10. Push the duplex unit back into position..

  • Page 79

    Mps9650c user’s guide> 80 11. If you detached a finisher unit to gain access to the duplex unit, replace the finisher unit..

  • Page 80: – F

    Mps9650c user’s guide> 81 p aper jams – f inisher ( optional accessory ) c heck f inisher , paper jam / paper remains use the help button on the printer control panel to check the number displayed. You will need this to be able to clear the paper jam. The following paragraphs explain what to do for ...

  • Page 81

    Mps9650c user’s guide> 82 2. Operate the finisher lever (1) and move the finisher away from the inverter. 3. Open the finisher top cover. 1.

  • Page 82

    Mps9650c user’s guide> 83 4. Carefully remove any jammed paper. 5. Close the finisher top cover. 6. Move the finisher back into position and connect it to the inverter..

  • Page 83: 594, 597, 598/ 644, 646 (

    Mps9650c user’s guide> 84 594, 597, 598/ 644, 646 ( paper jam in f inisher ) 1. Operate the finisher lever (1) and move the finisher away from the inverter. 2. Open the finisher front cover (2). 1 2.

  • Page 84

    Mps9650c user’s guide> 85 3. Continue to turn the lower knob (3) clockwise until any jammed paper is completely ejected. 4. Remove the ejected paper. 5. Close the finisher front cover. 3.

  • Page 85

    Mps9650c user’s guide> 86 6. Open the finisher right side cover. 7. Carefully remove any jammed paper. 8. Close the finisher right side cover..

  • Page 86: 590 (

    Mps9650c user’s guide> 87 9. Move the finisher back into position and connect it to the inverter. 590 ( paper jam in f inisher /p unch unit ) 1. Operate the finisher lever (1) and move the finisher away from the inverter. 1.

  • Page 87

    Mps9650c user’s guide> 88 2. Move the tab (2) on the right side of the finisher to align it with the mark (3). 3. Open the finisher top cover. 2 3.

  • Page 88

    Mps9650c user’s guide> 89 4. Carefully remove any jammed paper. 5. Close the finisher top cover. 6. Move the finisher back into position and connect it to the inverter..

  • Page 89

    Mps9650c user’s guide> 90 c heck i nverter , paper jam 1. Operate the finisher lever (1) and move the finisher away from the inverter. 2. Squeeze the recessed handle (2) and open the left side cover of the inverter. 1 2.

  • Page 90

    Mps9650c user’s guide> 91 3. Carefully remove any jammed paper. 4. Close the inverter left side cover. 5. Move the finisher back into position and connect it to the inverter..

  • Page 91

    Mps9650c user’s guide> 92 6. Operate the inverter lever (3) and separate the inverter from the printer. 7. Open the right side door (4) of the inverter. 3 4.

  • Page 92

    Mps9650c user’s guide> 93 8. Remove any jammed paper. 9. Close the right side door..

  • Page 93

    Mps9650c user’s guide> 94 10. Move the finisher and inverter back into position and connect to the printer. A voiding paper jams the following table summarizes possible causes of paper jams and suggests ways of avoiding them. Possible cause suggested remedy the printer is not level. Place the printe...

  • Page 94

    Mps9650c user’s guide> 95 d ealing with unsatisfactory printing your printer feed roller is dirty. Wipe the roller with a cloth moistened with water. Your printer feed rollers are wearing out. Replace the feed rollers. The media weight or type have been wrongly set. Select the correct printer menu s...

  • Page 95

    Mps9650c user’s guide> 96 printing is light. The toner cartridge is not properly seated. Reinstall the toner cartridge. The toner is low. Replace the toner cartridge. The paper is moist. Use paper stored in proper temperature and humidity conditions. The paper is not suitable for the printer. Use re...

  • Page 96: – F

    Mps9650c user’s guide> 97 s taple jams – f inisher ( optional accessory ) c heck f inisher , s taple j am when the display indicates a staple jam has occurred, clear the jam as follows: 1. Open the finisher front cover. White area of paper is lightly stained. Paper contains static. Use paper stored ...

  • Page 97

    Mps9650c user’s guide> 98 2. Turn the knob in the direction indicated until the colored indicator appears. 3. Remove any paper that awaits stapling in the paper ejection area..

  • Page 98

    Mps9650c user’s guide> 99 4. Pull out the staple unit. 5. Turn the knob in the direction indicated to move the stapler to the front..

  • Page 99

    Mps9650c user’s guide> 100 6. Grip both sides of the staple cartridge, pull it up and remove it. 7. Raise the staple cartridge gate. 8. Remove all staples that are emerging from the staple case..

  • Page 100

    Mps9650c user’s guide> 101 9. Return the staple cartridge gate to its original position. 10. Replace the staple cartridge. 11. Ensure that the staple cartridge is securely installed back into the staple unit then push the staple unit fully home..

  • Page 101

    Mps9650c user’s guide> 102 12. Close the finisher front cover, being careful not to trap your fingers..

  • Page 102: Pecifications

    Mps9650c user’s guide> 103 s pecifications item specification dimensions 23.6x25x18.5in (wxdxh) 599x625x471mm (wxdxh) weight without options, approx. 167.5 lb (76 kg) print speeds 36 ppm color; 40 ppm monochrome 20 – 28 lb paper resolution 1200 x 600 dpi emulations pcl 5c, pcl xl 2.1, ps, ibm ppr, e...

  • Page 103

    Mps9650c user’s guide> 104 noise level operating: 54dba maximum standby: 42dba maximum power save: 28dba maximum after 30 mins background level item specification.

  • Page 104: Ppendix

    Mps9650c user’s guide> 105 a ppendix a – d isplay p anel m essages the display panel messages are intended to be self-explanatory. Representative messages are given as examples below. Message comment ready to print your printer is online and ready to print. Printing tttttt your printer is printing a...

  • Page 105

    Mps9650c user’s guide> 106 open cover paper remains tttttt please see help for details additional paper has been detected after a paper jam has been cleared. Open tttttt side cover to check for additional paper. You can access help details by pressing the help button. Check image drum cccccc please ...

  • Page 106: Ppendix

    Mps9650c user’s guide> 107 a ppendix b – m enu system the top-level functions menus are: > configuration > print information > print secure job > menus > admin setup > calibration > print statistics the two other special top-level menus are: > boot menu > system maintenance the following tables summ...

  • Page 107

    Mps9650c user’s guide> 108 c onfiguration p rint p age c ount f inisher c ount item value description total pages nnnnnn displays the total number of pages printed. Note: in duplex printing, each sheet is counted as 2 pages. Color page nnnnnn displays number of color printed pages converted to lette...

  • Page 108

    Mps9650c user’s guide> 109 s upplies l ife n etwork item value description xxxx drum remaining nnn% displays the remaining life span of the xxxx drum as a percentage where xxxx can be cyan, magenta, yellow, black. Belt remaining nnn% displays the remaining life span of the belt unit as a percentage....

  • Page 109

    Mps9650c user’s guide> 110 p aper s ize in t ray s ystem item value description traym where m is in range 1 to 5 (similar arrangement for all trays) executive letter short edge letter long edge legal 14 legal 13.5 tabloid tabloid extra legal 13 a6 a5 a4 short edge a4 long edge a3 a3 nobi a3 wide b5 ...

  • Page 110: –

    Mps9650c user’s guide> 111 c onfiguration example – monochrome pages printed to display the total monochrome pages printed so far (remembering that a duplex page counts as two pages): 1. Ensure that the display panel indicates that the printer is ready to print. 2. Enter menu mode by pressing either...

  • Page 111

    Mps9650c user’s guide> 112 p rint i nformation item item description configuration execute prints printer configuration details. Network execute prints summary information about the wired network. Demo page demo 1 execute prints a demo page. File list execute prints a list of jobs stored on the hard...

  • Page 112: –

    Mps9650c user’s guide> 113 p rint i nformation example – demonstration page to print a printer demo page to demonstrate how your printer prints: 1. Ensure that the display panel indicates that the printer is ready to print. 2. Enter menu mode by pressing either the up-arrow or down-arrow button and ...

  • Page 113

    Mps9650c user’s guide> 114 p rint s ecure j ob item value description encrypted job enter password nnnn enter a password to use secure printing. Not found use to print an encrypted secure job that has been stored on the hdd. Not found: (no jobs) is indicated when there is no output file. The followi...

  • Page 114

    Mps9650c user’s guide> 115 m enus t ray c onfiguration item value description paper feed tray1 tray2 tray3 tray4 tray5 mp tray specifies a feed tray. Indicated only when tray2–5 implemented. Auto tray switch on off sets the automatic tray switch function. Tray sequence down up paper feed tray specif...

  • Page 115

    Mps9650c user’s guide> 116 traym config, where m is in range 1 to 5 (similar arrangement for all trays) paper size tray size custom sets paper in traym. X dimension 3.9 – 8.3 (a) – 8.5 (l) – 12.9 inch 100 – 210 (a) – 216 (l) – 328 mm sets custom paper width for traym. Sets for the direction perpendi...

  • Page 116

    Mps9650c user’s guide> 117 traym config, where m is in range 1 to 5 (similar arrangement for all trays) legal 14 paper legal 14 legal 13.5 sets the length of the legal paper in traym. Change this to legal 13.5 if that is the standard legal size in your country. Item value description.

  • Page 117

    Mps9650c user’s guide> 118 mp tray config paper size a3 nobi a3 wide a3 a4 sht edge a4 long edge (a) a5 a6 b4 b5 short edge b5 long edge legal 14 legal 13.5 tabloid extra tabloid letter sht edge letter long edge (l) executive custom com-9 envelope com-10 envelope monarch envelope dl envelope landsca...

  • Page 118

    Mps9650c user’s guide> 119 mp tray config media type plain letterhead transparency labels bond recycled card stock rough glossy envelope user type1 user type2 user type3 user type4 user type5 user type 6 user type 7 user type 8 user type 9 user type 10 sets the media type for mp tray. Media weight a...

  • Page 119

    Mps9650c user’s guide> 120 s ystem a djust item value description power save time 3 min 5 min 15 min 30 min 60 min 240 min sets the period after which power save mode starts. Clearable warning online job when online is selected, you must manually clear the warning by pressing the online button. Chan...

  • Page 120

    Mps9650c user’s guide> 121 low toner continue stop sets the printing operation when insufficient toner is detected. Continue: the printer can continue printing while remaining online. Stop: the printer stops printing and goes offline. Jam recovery on off on: continues printing the job, including any...

  • Page 121

    Mps9650c user’s guide> 122 print position adjust duplex x adjust 0.00 +0.25 – +2.00 -2.00 – -0.25 mm 0.00 +0.01 – +0.08 -0.08 – -0.01in during the flip-side printing of duplex printing, adjusts the location of the whole printing image (0.25 mm, 0.01in interval) perpendicular to the direction of pape...

  • Page 122

    Mps9650c user’s guide> 123 paper color setting 0 +1 +2 -2 -1 used for fine color adjustment for a significantly white horizontal dotted line, a significantly faded image or other such a problem that occurs in results printed on plain paper. Decrement setting when a white horizontal dotted line or a ...

  • Page 123: 1 – T

    Mps9650c user’s guide> 124 m enus example 1 – t ray 1 transparencies to print on transparencies (accommodated in tray1): 1. Ensure that the display panel indicates that the printer is ready to print. 2. Enter menu mode by pressing either the up-arrow or down-arrow button and press them repeatedly un...

  • Page 124: 2 – Mp T

    Mps9650c user’s guide> 125 5. Press the enter button to select this item. 6. Press the up-arrow or down-arrow buttons repeatedly until tray1 config is highlighted. 7. Press the enter button to select this item. 8. Press the up-arrow or down-arrow buttons repeatedly until mediatype is highlighted. 9....

  • Page 125

    Mps9650c user’s guide> 126 10. Press the up-arrow or down-arrow buttons repeatedly to move through the range of paper sizes until the required size is highlighted. 11. Press the enter button to select this value. 12. Check that an asterisk (*) appears beside the chosen size. 13. Press the online but...