Oki OF5650 Options Manual - page 7
|
Setup Guide: English
7
Please note that Unimessage Pro will operate on the above PC
configuration; however, this is a minimum.
For each of the above systems requirements, the following
configuration is also required:
• Bi-directional parallel printer port
• IEEE1284-1994 standard parallel interface cable
• Internet Explorer 4.0 or above, to view the on-line User’s
Guide.
Driver Setup
Windows 2000
Note: Administrator’s authority is required for
installation with Windows 2000.
1. Make sure that both the printer and the computer are
turned OFF.
2. Connect the fax machine and computer with a parallel
interface cable.
3. Turn the computer ON and allow Windows to start.
4. Turn the fax machine ON. At the prompt telling that a new
device has been detected, select Cancel.
5. Insert the OKIFAX 5650 MFP Option Kit CD-ROM into
your CD-ROM drive.
6. After the setup program has automatically started, click
Setup device driver and Unimessage Pro and follow the
on-screen instructions as appropriate This installs both the
printer driver and the Unimessage Pro software.
Note: If you want to install only the driver, click Setup
device driver.
Note: If the setup program does not automatically start
or Auto insert notification is turned off, click
Start
→
→
→
→
→Run.... Type in D:\SETUP.EXE (where D is
the drive letter of your CD-ROM drive) and click OK.
7. When the Fax Port Installation dialog appears, click OK.
8. When the Add/Remove Hardware Wizard dialog
appears, do the following:
(a) When the Welcome to the Add/Remove Hardware
Wizard dialog appears, click Next.
(b) When the Choose a Hardware Task dialog appears,
select Add/Troubleshoot a device and click Next.