Oki OF5650 Options Manual - page 9
|
Setup Guide: English
9
Windows Me/98/95
1. Make sure that both the printer and the computer are
turned OFF.
2. Connect the fax machine and computer with a parallel
interface cable.
3. Turn the fax machine and computer ON and allow
Windows to start. If you see a prompt telling you that a
new device has been detected, press Cancel.
4. Insert the OKIFAX 5650 MFP Option Kit CD-ROM into
your CD-ROM drive.
5. After the setup program has automatically started, click
Setup device driver and Unimessage Pro and follow the
on-screen instructions as appropriate.
Note: If you want to install only the driver, click Setup
device driver.
Note: If the setup program does not automatically start
or Auto insert notification is turned off, click on
Start
→
→
→
→
→Run.... Type in D:\SETUP.EXE (where D is
the drive letter of your CD-ROM drive) and click OK.
6. When the Install Complete screen appears, click Finish.
After the computer restarts, setup of the driver is complete.
Windows NT 4.0
Note: Administrator’s authority is required for
installation with Windows NT 4.0.
1. Make sure that both the printer and the computer are
turned OFF.
2. Connect the fax machine and computer with a parallel
interface cable.
3. Turn the fax machine and computer ON and allow
Windows to start. If you see a prompt telling you that a
new device has been detected, press Cancel.
4. Insert the OKIFAX 5650 MFP Option Kit CD-ROM into
your CD-ROM drive.
5. After the setup program has automatically started, click
Setup device driver and Unimessage Pro and follow the
on-screen instructions as appropriate This installs both the
printer driver and the Unimessage Pro software.
Note: If you want to install only the driver, click Setup
device driver.
Note: If the setup program does not automatically start
or Auto insert notification is turned off, click
Start
→
→
→
→
→Run... Type in D:\SETUP.EXE (where D is
the drive letter of your CD-ROM drive) and click OK.