Oki OF5750 Options Manual - page 65
|
T.37 Option Guide: English
65
How it Works
The document is scanned as if it were being sent as an
Internet Fax, but the document is actually sent to an e-mail
address on the network.
The recipient (destination e-mail address) receives the
document on their PC as a TIFF file.
Image Resolution
The setting for User Function 89: Ex.Fine Mode adjusts
the resolution of the scanned image.
The resolution may be set between 300 and 600 dpi.
!
The OKI HRS600 (600 dpi TX) option (8 MB of
memory) must be installed to achieve 600 dpi scan
resolution.
IFAX Sender ID
User Function 90: IFAX Sender ID must be set to ON when
you are using your fax machine for faxing using the Internet.
This places the IFAX Sender ID on the top of any documents
you send.
However, when you are using your fax machine as a network
scanner, you do not want this information to appear on your
scanned documents.
!
Set User Function 90: IFAX SENDER ID to OFF while
using your fax machine as a network scanner.
The IFAX Sender ID will not appear at the top of
scanned documents.
Be sure to set IFAX Sender ID to ON when sending
faxes.