Oki OF5750 Options Manual - page 81
|
T.37 Option Guide: English
81
If you are using your fax as a scanner, turn this setting
off. This prevents the sender ID data from appearing in
scanned images.
I’ve entered the DNS name of the SMTP server, but it
doesn’t work.
Try entering the IP address.
I’ve changed the settings for the network card (User
Function 93), but the changes are not being implemented.
Did you press MENU while the initialization message was
displayed?
Pressing MENU while the initialization message is on
display (after changing the settings) will cause the
machine to “lose” the setting changes and the settings will
not update correctly.
My server does not support APOP, and my fax machine is
experiencing communication errors
Make sure the OKIVIEW 32 Setting, Use APOP, is set to
OFF.
This setting is available when you are using a POP server
that supports APOP.
With APOP, the POP password will be encrypted before it is
sent.
A communication error will occur if this setting is turned
on when using a server which does not support APOP.
Refer to “Setting Up on a Network, Using the
OKILAN 7100e+ Web Page, Changing the Settings Using
the Web Page.”
My machine won’t receive Internet Faxes while a print
alarm (e.g., no paper, cover open, paper jam) is exists.
Change User Function 86, Text Print to OFF.
Your machine will receive Internet Faxes while a print
alarm exists.
My fax machine stops receiving messages before they are
completely received.
Make sure that your machine has enough free memory to
receive fax messages.
Internet Faxes are received into memory.
If too little memory is available, reception may be
terminated before the complete message is received.
Install an optional memory expansion kit if your Internet
Fax receptions frequently terminate before completion.