Oki OF5950DL User Manual - page 115
|
User’s Guide: English
101
Programming a Group
!
The locations you use to create a group MUST BE
programmed as One Touch, 2-digit, or 3-digit Speed
Dials before you create a group. Refer to
“Programming Speed Dial Numbers.”
Print the Group Directory Report before programming
a Group. This report is a reference of group numbers
already programmed. See “Reports, Group
Directories.”
1 Press Menu/Exit to enter the Menu.
2 Press
Ä to select Location Program, press Enter.
3 The cursor will be at Speed Dial, Press
Ä to select Group,
press Enter.
4 Input a group dial number (from 1-20), press Enter.
5 Enter locations by pressing either a One Touch key or the
Speed Dial number. Press Enter. Continue until all
locations are entered. Press Start.
6 Enter a Group ID (name), then press Enter.
7 Press Menu/Exit to return to standby mode.