Oki OF5950DL User Manual - page 69

|

User’s Guide:  English

55

Busy Tone Detect

Speed access no. 44

This function allows your machine to detect a busy tone

when sending a fax.

Available settings are ON and OFF.

ON is the default setting.

Tone/Pulse (MF/DP)

Speed access no. 45

This function controls which method your machine uses for

dialing.

DP: dial pulse dialing, which uses monotone pulses to dial a

number like a rotary telephone,

MF: multi-frequency dialing (touch tone), which uses

different tones to dial a number.

MF is the default setting.

Tone (MF) Duration

Speed access no.49

If the machine is set to the MF dialing method, this function

controls the duration of the tones used for dialing.

Tone duration varies by country.

Available settings are 75, 85, and 100 ms.

100 ms is the default setting.

PBX LINE

Speed access no. 50

This function must be ON if your machine is connected to a

PBX. Once this function has been turned on and the access

digit function has been programmed, your machine

recognizes the access digit you use in your PBX to get an

outside line.

Available settings are on and OFF.

OFF is the default setting.

To change this setting, see “Setting Basic Features,

Connecting to a PBX.”