Oki OKICOLOR8cccs Hardware Installation Manual - page 7
Manual is about: OKI DIGITAL LED PRINTER User Manual
of
19
|
Hardware Installation Guide: English
7
5 Push in until the metallic contacts are fully inserted into
the socket.
6 Push the SIMM card forward slightly until it snaps into
place. The plastic mount pins should fit into the holes on
each end of the SIMM card.
Installing the Board
1 Locate the guide rails (1) and edge connector (2) in the
printer.
2 Insert the option board into the printer, making sure that it
locates in the guide rails. Slide in the board and push it
firmly into place.
3 Tighten the screws.
!
If the screws do not fit, the board may not be properly
seated. Slide the board out and reinstall it.