Oki OKIOFFICE 84 User Handbook Manual - page 73
Other manuals for OKIOFFICE 84:
Quick Reference, User Handbook Manual, Regulatory Information, Setup Manual, User Manual, Service Manual
of
99
66
|
Handbook
Changing Your Dial Parameter Settings
1
Press the Select Function key.
2
Press the 9/User Program One Touch key.
3
On the numeric keypad, press 2. The display shows
2:DIAL PARAMETER.
4
Press the Yes
§ key until the display shows the dial
parameter
MH ONLY: This function controls the type of
compression method your MFP uses during
communication. Available settings are on and off.
H/MODEM RATE: This function controls the
communications speed your MFP’s modem uses at the
beginning of a fax communication. Available settings are
14.4K, 9.6K and 4.8K.