1. DL manuals
  2. Oki
  3. Printer
  4. OKIPAGE 10ex
  5. Setup Manual

Oki OKIPAGE 10ex Setup Manual

Manual is about: LED Page Printer

Summary of OKIPAGE 10ex

  • Page 1

    Setup guide.

  • Page 2

    Okipage 10ex, 12i/n 2 every effort has been made to ensure that the information in this document is complete, accurate, and up-to-date. Oki assumes no responsibility for the results of errors beyond its control. Oki also cannot guarantee that changes in software and equipment made by other manufactu...

  • Page 3: Contents

    Setup guide 3 english contents safety instructions ............................................................ 4 important wiring instructions .......................................... 5 printer features ................................................................. 6 optional accessories ........

  • Page 4: Safety Instructions

    Okipage 10ex, 12i/n 4 safety instructions your oki printer has been carefully designed to give you years of safe, reliable performance. As with all electrical equipment, however, there are a few basic precautions you should take to avoid hurting yourself or damaging the printer: • read the setup ins...

  • Page 5

    Setup guide 5 english • aside from the routine maintenance described in this handbook, do not try to service the printer yourself; opening the cover may expose you to shocks or other hazards. • do not make any adjustments other than those outlined in the handbook you may cause damage requiring exten...

  • Page 6: Printer Features

    Okipage 10ex, 12i/n 6 printer features okipage 12i/n as for 10ex except: • led 12ppm page printer • 4mb memory standard • adobe postscript ® 2 (v2017) • 10baset network adaptor card • duty cycle – up to 15,000 pages per month • printer life – 180,000 pages or five years optional accessories • 500 sh...

  • Page 7: Check The Contents

    Setup guide 7 english 1 ○ ○ ○ ○ ○ ○ 2 3 4 5 6 7 check the contents the following sections will lead you through installing your printer, changing the default language, viewing and changing the default menu settings and finally producing a demo print page, a sample font listing and menu settings list...

  • Page 8: Printer Components

    Okipage 10ex, 12i/n 8 printer components power cable receptacle rear paper exit tray power switch top paper exit bin manual feed tray automatic paper feed tray bi-directional parallel interface port led array image drum cartridge with toner installed 10baset network card (okipage 12i/n).

  • Page 9: Setting Up Your Printer

    Setup guide 9 english setting up your printer before connecting the printer to your pc and mains outlet, you must first install the toner cartridge and insert paper in the paper tray. Remove the protective sheet 1. Remove any adhesive tape from the outer covers. Press and open the cover. The first t...

  • Page 10

    Okipage 10ex, 12i/n 10 installing toner do not remove cartridge from packaging. Use oki type 5 image drum and toner cartridges only. 1. Remove the sponge and discard. 2. Shake the toner cartridge to evenly distribute toner. 3. Unwrap the new cartridge. 4. Carefully peel off the sealing tape..

  • Page 11

    Setup guide 11 english 1 2 5. Insert the cartridge into the printer, left end first as illustrated. 6. Push the coloured tab forward to release the toner into the toner hopper. 7. Close the printer cover..

  • Page 12

    Okipage 10ex, 12i/n 12 1 2 1 3 installing paper 1. Remove the paper tray from the bottom of the printer and place plain paper in the tray, carefully keeping the level of the paper in the tray below the guide marks (1). 2. Adjust the rear paper support (2) to the size of paper you are using by liftin...

  • Page 13: Connecting Your Printer

    Setup guide 13 english connecting your printer make sure your printer is not plugged in and your computer is turned off. 1. Plug the interface cable into the parallel socket on the printer. 2. Plug the power cable into the printer, then into a grounded outlet. The parallel cable should support bi-di...

  • Page 14

    Okipage 10ex, 12i/n 14 installing windows printer drivers it is normally necessary to install a driver to setup your printer to work correctly in your system. The choice of drivers may include pcl, pcl5e, pcl6, pcl-xl, postscript or hiper-w (oki high performance driver for windows), depending on the...

  • Page 15: Creating Sample Printouts

    Setup guide 15 english creating sample printouts demo page 1. Press the on-line button so that the display reads off-line . 2. Press the form feed/print demo button for two seconds. 3. The message demo hp pcl6 will be displayed. 4. Press enter. Sample font listing 1. Press the on-line button so that...

  • Page 16: Index

    Okipage 10ex, 12i/n 16 index a accessories .............................................. 6, 8 c cable data interface ......................................... 13 power ............................................. 5, 7, 13 cleaning the printer ...................................... 4 compatibility ...