Oki OKIPAGE 10ex Setup Manual - page 5
Setup Guide
5
English
• Aside from the routine maintenance described in this
handbook, do not try to service the printer yourself;
opening the cover may expose you to shocks or other
hazards.
• Do not make any adjustments other than those outlined in
the handbook you may cause damage requiring extensive
repair work.
• It is recommended that the printer be switched off prior to
opening or removing covers.
If anything happens that indicates that your printer is not
working properly or has been damaged, unplug it immediately
and contact your dealer.
These are some of the things to look for:
• The power cable or plug is frayed or damaged.
• Liquid has been spilled into the printer, or it has been
exposed to water.
• The printer has been dropped, or the cabinet is damaged.
• The printer does not function normally when you are
following the operating instructions.
Important Wiring Instructions
Wires in the power cable are coloured in accordance with the
following code:
Green and Yellow
—
Earth
Blue
—
Neutral
Brown
—
Live
If the colours of the wires in the power cable of this printer do not
correspond with the markings of the terminals of your plug,
proceed as follows:
• Green and Yellow must be connected to the terminal marked
with the letter
E
(or the safety earth symbol) or the terminal
coloured Green or Green & Yellow.
• Brown must be connected to the terminal marked with the
letter
L
or coloured Red.
• Blue must be connected to the terminal marked with the
letter
N
or coloured Blue or Black.
This printer must be earthed.
If you are in any doubt regarding the wiring, please contact a
qualified electrician.