Oki OKIPAGE14e User Manual - page 15
User’s Guide
|
E-15
Resetting the Menu
The menu can be reset to the factory (default) settings in
the Printer Reset box of the Maintenance 1 Menu.
Using Power Save to Minimize Warm-up
Time
To minimize the printer’s warm-up time between print
jobs:
1 Open the Status Monitor.
2 Select the Printer Setup tab.
3 Click the Printer Menu button.
4 Select the Economy tab.
5 In the Power Save menu, choose a higher setting to
delay power save mode (default setting is 15 min.)
6 Click Apply. Click OK.
To Disable Power Save
1 Open the Status Monitor.
2 Select the Printer Setup tab.
3 Click the Printer Menu button.
4 Select the Maintenance 2 tab.
5 Under Setting Power Save, click the Setting button.
6 Remove the check in the Enable Power Save box.
Click OK.
Click on the appropriate tab to see the menu settings.
!
Click the Help button for a explanation of the menu
settings.
1 Set Raster Buffer, Font Protection.
2 Reset menu, drum count, print menu, interface.
3 Set display language, page placement, and print
position.
!
We suggest that only experienced users should
change these settings.
4 Access printer hardware and firmware information.
5 Select paper source, weight, size, transparencies.
6 Adjust lines per page, orientation, edit size, and select
emulation (PCL, IBM
,
EPSON
).
7 Set print output quality, darkness setting.
8 Set power save, toner save.
9 Print demo page, font page, menu settings, cleaning
page.