Oki OKIPAGE14e User Manual - page 24
E-24
|
OKIPAGE 14e
3 Lift out the used image drum cartridge with toner
cartridge installed. Dispose of properly with the
black plastic bag included with the new image drum
kit.
4 Remove the new image drum cartridge from the
package. To install the new image drum cartridge,
follow the installation instructions included in the
replacement kit.
Reset the Drum Counter in the Status Monitor
5 Be sure to reset the drum counter located on the
Maintenance 1 tab in the printer menu. See “Using
the Printer Menu Setup” for details (page 14).
To reset the drum counter without the Status Monitor
1 Power off the printer.
2 Open the top cover.
3 Press and hold the oval switch on the operator
panel.
4 While continuing to hold down the switch,
power on the printer.
5 The lights on the front panel will flash twice, release
the button and close the cover.