S900 service manual 031103a.
S900 ---------------------------------------------------------------------------------------------------------------------------------------------- ii contents 1. Introduction ...............................................................................................................................
S900 ------------------------------------------------------------------------------------------------------------------------------------------------- iii 7. Disassembly .....................................................................................................................................
S900 1-1 1. Introduction 1.1 general notes for servicing 1.2 general description 1.3 specifications this manual is intended to be used by maintenance engineers. It describes areas to be maintained, the detailed installation, and the component replacement procedures as well as the main trouble shooti...
S900 1-2 1.2 general description the s900 provides you a fast and affordable access to color digital copying by simply connecting the product to a color printer. This new way to make digital copies is cost effective, and it produces dramatically better copies result than regular analog copiers. The ...
S900 1-3 copy specification printer language pcl connector interface ieee 1394 cable copy area 297 x 431 mm (11.19" x 16.97") multiple copies up to 99 copy mode speed, finetext, photo enlarge / reduce whole page (93%) 25%~400% in 1% increment/decrement pre-set scales copy features paper size auto de...
S900 2-1 2. Unpacking, installation, and transportation 2.1 precautions of installation 2.2 unpacking procedure 2.3 installation 2.4 placing the original 2.5 transportation 2.1 precautions of installation pay attention to the following matters before unpacking and installation. • do not install in a...
S900 2-2 1. Auto document feeder (optional) 5. Ieee1394 cable (for printer connection) 2. S900 main unit 6. Power adapter 3. Usb cable (for computer connection) 7. Cross cable 4. Cd (service tool) 8. Power cord (us, uk, europe, australia) 6 5 4 3 1 2 7 8.
S900 2-3 2.3 installation 2.3.1 unlocking the scan unit the scan unit is locked during transport to protect the scanning mechanism from being damaged. Be sure to unlock the scan unit before using the machine. 1). Locate the lock switch at the left side of the machine. 2). Push the lock switch down t...
S900 2-4 2.3.2 connecting the ieee 1394 cable 1. Connect one end of the ieee 1394 cable (included) to your printer. 2. Connect the other end to the printer port of your s900. 2.3.3 connecting the adf cable (optional) connect the adf cable, which is attached to the document cover to the adf port..
S900 2-5 2.3.4 setting up the optional adf (auto document feeder) 1. Raise the adf tray to about 45 degrees. 2. Pull down the wire leg beneath the adf tray. 3. Pull out the adf tray extension to its full length. 2.3.5 connecting the power and turning on the machine 1. Press the power switch to the “...
S900 2-6 4. Press the power switch to the “i” position to turn on your s900. After showing the warming up message, the lcd display prompts the copy ready status. 2.4 placing the original you can load the paper from the s900 either in the adf (automatic document feeder) or on the glass. If you need t...
S900 2-7 2.4.2 placing document(s) in the adf 2.4.2.1 notice on using the adf before using the adf, please make sure that your paper meets the following specifications: • document(s) can range in size from 4.5 by 5.5 inches to 11.69 by 16.54 inches (a3). • document(s) can range in weight from 14 to ...
S900 2-8 2.4.2.2 placing document(s) in the adf 1. Make sure your document is free of staples, paper clips and is not torn out. 2. If you have multiple pages, fan your document(s) to avoid occasional paper jam. The adf can hold up to 50 pages at one time. 3. Place your document(s) with the text face...
S900 3-1 3. Parts identification 3.1 external view 3.1 external view 3.1.1 front view 1. Document cover 2. Control panel 1 2.
S900 3-2 3.1.2 rear view 1. Printer port 2. Service port 3. Usb port 4. Adf port 5. Power jack 1 2 3 4 5.
S900 4-1 4. Theory of operation 4.1 introduction 4.2 main control unit 4.1 introduction figure 5.1 theory of operation the reflected rays of the your original as shown in the above figure 5.1 pass through the lens and creates an image on the ccd (charge-coupled device). Then, according to the differ...
S900 4-2 4.2.1 system diagram figure 5.2 shows the system block diagram. Figure 5.2 system block diagram image processor main board control section optical unit lamp unit inverter power adapter lcd display & control panel 24v to printer cpu adf ieee 1394 controller rj-45 mac/phy. Usb 2.0 controller ...
S900 4-3 4.2.2 main control circuit mips cpu controls this s900. The cpu is configured with a 2.5mb external rom, a 128mb external ram working area. I/o address maps: • rom area: flash layout loader system firmware scanner firmware printer profile • external ram working area: 256kb 256kb 0x1e000000 ...
S900 4-4 4.2.3 video circuit: the video circuit of this s900 includes: 1. Ccd driving circuit and motor control signal 2. Ccd signal processing circuit. 1. Ccd driving circuit & motor control signal the ccd driving circuit is used to generate correct signals to the ccd, so that the ccd may generate ...
S900 4-5 cds ccd signal processor cds cds pga pga pga ccd mux adc r g b dout the ccd signal processor includes all the necessary circuitry to perform three-channel conditioning and sampling. The signal chain consists of three-channel correlated double sampling (cds) and programmable gain adjustment ...
S900 4-6 4.2.4 panel and lcd module circuit the circuit for panel and lcd module controls the function of the entire module including the lcd display, the push button on the control panel, and led display. Pin assignment of lcd module pin no. Name function 1 d.G. Digital ground 2 kpdata0 data bus bi...
S900 4-7 4.2.5 sensor input the sensor input includes home position sensor, hall effect sensor, and paper size sensor. (1) home position sensor the home position of the carrier motor is detected by photo sensor. The photo transistor transmission to the photo sensor receiver circuit is shown below. F...
S900 4-8 (4) paper size sensor the paper size is detected by ir sensor. The ir transistor transmission to the ir sensor receiver circuit is shown below. Figure 5.5 paper size sensor 4.2.6 sub power supply circuit the sub power supply circuit is provided for the internal analog circuit. The circuit c...
S900 4-9 4.2.7 power supply in this system, there is only one type of power supply. Please see table 5.1 for details. Table 5.1 power adapter type characteristic wall-mount input voltage range 100-240v input current (max.) 1.4a input frequency 50-60hz max. In-rush current(@115vac, cold start) 4a out...
S900 5-1 5. Troubleshooting 5.1 troubleshooting flowchart 5.2 tables this section locates and resolves the causes of trouble so the s900 is always in good working condition. The trouble modes, relevant units and maintenance methods are described below. When a problem occurs, troubleshoot the problem...
S900 5-2 5.1 troubleshooting flowchart 5.1.1 power on to s900 ready figure 5.1 power on to s900 ready power on lcd shows booting up . Message no yes see table 5-1 wait for command from control panel or pc lcd shows copy menu info.
S900 5-3 5.1.2 copy operation figure 5.2 copy operation flow chart copier online troubleshooting check printer online? Scanning performed printing completed image not clear noises generated end no yes yes yes yes yes no no yes no no see table 5-2 see table 5-3 see table 5-5 see table 5-6 no see tabl...
S900 5-4 5.1.3 contorl panel operation copier online troubleshooting lcd shows message value setting wait for key pressing no yes yes end no see table 6-7 figure 5.3 control panel operation see table 5-7.
S900 5-5 5.2 tables the following tables provide detailed troubleshooting information. Table 5.1 the lcd does not display. Table 5.2 printer does not react. Table 5.3 optical path or hardware problem. Table 5.4 printer does not print. Table 5.5 image not clear. Table 5.6 noise generated. Table 5.7 l...
S900 5-6 5.2.1 lcd does not display table 5.1 cause relevant unit check method maintenance method unplugged from outlet none visual check insert the ac plug into the outlet dc power unplugged from unit none visual check insert the dc power adapter cable into the unit ac voltage failure none ac outle...
S900 5-7 5.2.3 scanning is not performed table 5.3 cause relevant unit check method maintenance method scanner cable failure scanner cable visual check attach the scanner cable main pcb replace the pcb scanner link failure scan module visual check replace the scan module 5.2.4 printer does not print...
S900 5-8 5.2.5 image unclear table 5-5 cause relevant unit check method maintenance method lamp too dark lamp visual check replace the lamp dirt on flatbed glass flatbed glass visual check clean the flatbed glass with isopropyl alcohol printer toner low printer toner visual check check printer toner...
S900 5-9 5.2.7 lcd does not show message after command table 5-7 cause maintenance method lcd module cable failure attach the lcd module cable and secure it firmly lcd problem replace the lcd module push button failure replace the lcd module.
S900 5-10 5.2.8 s900 is not connected to the network table 5.8 cause maintenance method rj-45 connector is not plugged in plug the connector in network cable is damaged replace the cable for your information, the assigned ip address for s900 and your computer should be: s900’s ip address subnet mask...
S900 5-11 5.2.9 error codes in lcd lcd message lcd message action copy function disabled. Please download the printer profile. Check printer cable or status. 1. Check if the printer cable has been correctly connected. 2. Check if the printer is turned on. 3. Restart the s900 unit and your printer. 4...
S900 5-12 info code meaning action 20004 printer offline please check printer. 20011 ~ 20019 copy job error reset scanner, and then try again. If the code still appears, contact your dealer. 20021 ~ 20029 1394 protocol error reset scanner and printer, and then try again. If the code still appears, c...
S900 5-13 5.3 clearing the paper jam 1. Press the push button on the adf front cover and open the cover to the left. 2. Gently pull out the jammed paper. 3. Close the adf cover. Adf push button document.
S900 6-1 6. Preventive maintenance 6.1 cleaning this s900 is designed to be maintenance free. However, it is suggested to perform preventive maintenance in the shorter term either every 6 months or every 60,000 sheets scanning to ensure a consistently optimum performance. 6.1 cleaning the document g...
S900 7-1 7. Disassembly 7.1 service tools 7.2 lubricants 7.3 procedure for disassembly and reassembly 7.1 service tools table 7.1 describes the maintenance tools necessary for the maintenance of this equipment. No. Name description 1 standard screwdriver idler pulley module screw 2 philips screwdriv...
S900 7-2 7.2 lubricants this section describes the items to check and the places to lubricate when maintenance parts are replaced. 7.2.1 mechanical unit lubrication this lubrication method: 1 - a - c - y 1. Positions need to be lubricated: the positions need to be lubricated is indicated in numbers....
S900 7-3 positions need to be lubricated 2 sliding rod 1 sliding guide.
S900 7-4 7.3 procedure for disassembly and reassembly 7.3.1 notes on disassembly (1) clean the disassembly and assembly location. (2) disconnect the power cable and remove the dc plug from the outlet before disassembly and assembly. (3) follow the disassembly and assembly procedures. Never loosen th...
S900 7-5 7.3.3 control panel (1) remove the document cover as described in the preceding section 7.3.2. (2) raise the main unit as shown below. Remove the three fixing screw of the control panel. (3) lay down the main unit. Loosen the control panel pcba assembly by lifting it up. Disconnect the flat...
S900 7-6 7.3.4 upper housing (1) remove document cover as described in the subsection 7.3.2. (2) remove control panel pcba as described in subsection 7.3.3. (3) remove the fixing screws of the control panel. (4) remove the bottom housing of the control panel by detaching the hook. (5) loosen the fix...
S900 7-7 7.3.5 document cover sensor pcba (1) remove document cover as described in the subsection 7.3.2. (2) remove upper housing as described in preceding section 7.3.4. (3) move the optical chassis to the center as illustrated below. (4) loosen the fixing screw to remove the paper sensor pcba. Op...
S900 7-8 7.3.6 paper sensor pcba (1) remove upper housing as described in preceding section 7.3.4. (2) loosen the fixing screw to remove the paper sensor pcba. Fixing screw.
S900 7-9 7.3.7 main control board assembly (1) turn the machine over to reveal the bottom. Loosen the fixing screws of the metal cover from the bottom housing. (2) raise the main board to disconnect the cables. (3) loosen all flat cables. (4) loosen the fixing screws of the scsi connector with prope...
S900 7-10 7.3.8 motor belt (1) remove upper housing. (see preceding section 7.3.4) (2) move the optical chassis to the center as illustrated below. (3) loosen the fixing screw of the belt to detach the left end of the belt. (4) remove the other end of the belt from the hook. • note during the reinst...
S900 7-11 7.3.9 optical chassis disassembling procedure (1) remove the upper housing. (see section 7.3.4 ) (2) remove the main control pcba. (see section 7.3.5) (3) remove the motor belt. (see section 7.3.6) (4) remove the fixing screws of the sliding rod, then pull it out gently as illustrated belo...
S900 7-12 (5) remove the flat cable of the optical chassis as illustrated below. (6) hold the right side of the optical chassis to remove it gently from the machine. (be careful not to touch the ccd board as well as the lamp in the optical chassis.) • note: 1. While reinstalling the optical chassis,...
S900 7-13 7.3.10 ccfl inverter pcba (1) remove the optical chassis. (see preceding section 7.3.7). (2) remove the fixing screw of the cover. (3) disconnect the ccfl inverter cable and ccfl inverter pcba cable. Ccfc inverter pcba removal optical chassis fixing screw ccfl inverter pcba.
S900 7-14 7.3.11 lamp assembly (1) remove the optical chassis. (see section 7.3.7) (2) disconnect all cables of the lamp assembly. (3) detach the lamp from the lamp holder. Lamp assembly lamp assembly optical chassis lamp assembly lamp cable.
S900 7-15 7.3.12 motor unit (1) remove the optical chassis and the ccfl inverter pcba. (see section 7.3.7 and 7.3.8) (2) remove the lamp assembly. (see preceding section 7.3.9) (3) loosen the fixing screw to remove the motor mount as shown in the figure below. (4) loosen the fixing screw and disconn...
S900 8-1 8. Parts 8.1 spare parts list 8.1 spare parts list please find the following spare parts list and its illustration..
S900 8-2.
S900 8-3.
S900 8-4 item p/n rev. Description order q'ty 1 53085301 100 s-parts: ass'y, document cover 1 1-1 50810701 100 s-parts: ass'y, hinge 1 2 56734801 100 s-parts: ass'y, upper housing, a3 size 1 3 100 s-parts: sliding rod, 12x553,sum1214, ni 6u 1 4 100 s-parts: sliding frame, 621x12x28x1.6/ni 6u 1 5 513...
S900 8-5 others a-1 56638402 100 s-parts: ac power cord: 125v/10a, 1.8m(ul/csa) 1 b 56416802 100 s-parts: adaptor: 24v/2.0a, 100~240v/50~60hz 1 c 56640201 100 s-parts: usb 2.0 cable 1 d 010 cd: oki s900 1 e 56638901 010 s-parts: cross cable: internet cable, 8p 4c, 1.8m 1 f 010 carton: 710x280x680, o...