Oki X400 Installation Manual - B Install The Memory Card
Other manuals for X400:
Safety Information Manual, User Manual, User Manual, Assembly Instructions, Install Sheet, Manual
Manual is about: X400 Programming Command Manual
of
8
3
NOTE: Pull the lower front edge of the housing away from the base assembly first, and then begin
manipulating the housing upward. Since there is enough play in the cable connecting the housing to the
circuit board, it’s not necessary to unplug it. Simply lay the housing next to the printer assembly.
B Install the Memory Card
1. Locate the Expansion Slot on the main circuit board. (It’s the pin 44 black connector in the middle
of the main circuit board).