P+S Technik Weisscam HS-1 Operator's Manual - page 44
G|4
Playback of Saved Files
Open the software
FrameCycler
(icon on desktop) and load
the saved file you want to work with.
Play the sequence. If you need to see full frame, turn
Resa-
mple
off
.
->
Do not copy in the background, when watching the
sequence with FrameCycler. It will slow down the playback
speed.
->
Learn all shortcuts of Framecycler, it helps a lot and it is
very fast….(Short Cut table can be found in the reference part
of this guide book)
->
Learn more about the software, you can show color
correction, vector scope etc.
More information can be found in the reference part of this guide book
or contact P+S Technik by email to
info@pstechnik.de
Safety Copy / Data Transfer
Connect the external hard drive to the USB2.0 connector of
the Control Unit.
Make a copy of all recorded files, whenever you have time.
It is not good to do the safety copy at the end of the day (the
risk of lose your footage is too high and everybody under-
stands that you need a little time for the safety copy.
The Control Unit has a removable S-ATA hard drive. Check
with your client in advance, if it is possible to exchange data
with them (using the WEISSCAM hard drive). The inter-
nal safety copy would be faster than a copy to an external
USB2.0 hard drive. But you need to know how they want to
handle their data and if they can read a S-ATA hard disk. If
your client has no slot for a removable S-ATA disk, you may
buy a USB2.0 or Firewire case for the S-ATA hard disk or ask
if they have a slot for the S-ATA hard disk.
1.
2.
1.
2.
3.