P+S Technik Weisscam HS-1 Operator's Manual - page 8
of
66
A|4
Never completely discharge the battery pack attached
to the camera.
This might cause damage to the mains adap-
ter inside the camera!
Do not connect accessories to the DC 12V OUT con-
nector that pull more than 3A.
The Weisscam HS-1 Camera is fuse protected with a
6.3V/T fuse.
In case the fuse disconnects the power supply
for protection reasons, disconect the camera from the power
supply. After a view minutes the connection is released and the
camera can be run again. Check the power supply and con-
nected accessories for damages and malfunctions.
•
•
•