PACH & COMPANY AeGIS 91000CR1000 Installation and programming manual - page 20
Pach and Company
Chapter 3
Page 12
AeGIS 9000 Series
PROGRAMMING
FUNCTION CODE
LOCAL PROGRAMMING
Step 1
Log on to programming mode (see section 3.1). The display shows
Step 2
Enter Function Code 09 then press # and the display shows
Step 3
Enter the telephone number for the system to call up to 11-digit then press #,
the display shows
Step 4
Select another Function Code to program different field from the table or
press * to exit the programming mode.
Step 1
Log on to programming mode (see section 3.1). The display shows
Step 2
Enter Function Code 10 then press # and If relay 2 is set as a DOOR
CONTROL in Function Code 08 the display shows
If relay 2 is set other than a Door Control, proceed to step 4.
Step 3
Enter 1 for relay 1 (door 1) or 2 for relay 2 (door 2) then press #, the display
shows
Step 4
Enter 01-98 (unlock 1-98 hours) or 99 (unlock hold) then press #, the
display shows
Step 5
Select another Function Code to program different field from the table or
press * to exit the programming mode.
Step 1
Log on to programming mode (see section 3.1). The display shows
Step 2
Enter Function Code 11 then press # and the display shows
09
ALARM TELEPHONE NUMBER
To alert the manager by calling the
phone number programmed in
case:
• Door has been forced open.
• Door has been left ajar for over the
time set on Function Code 29.
• Invalid keypad code or card are
entered more than the lock-out count
programmed in function code 03.
• This feature is not applicable if
Relay 2 on Function Code 08 is set
as MODE 3.
10
MANUAL UNLOCK/LOCK OR
UNLOCK HOLD DOORS TIMER
Set the timer to unlock/lock or unlock
hold relay 1(door 1) or relay2 (door
2).
01-98 hours - doors will unlock and
lock for 01 - 98 hours.
99 - doors will unlock for indefinite
time (unlock hold).
11
EDIT WELCOME MESSAGE
DISPLAY
The welcome screen is a scrolling
display. A total 48-characters (16 -
characters for each segment) can be
programmed for the welcome
message.
SELECT PROGRAM
ENTER: _ _ PRESS #
TELEPHONE NUMBER
_ _ _ _ _ _ _ _ _ _ _
SELECT PROGRAM
ENTER: _ _ PRESS #
SELECT PROGRAM
ENTER: _ _ PRESS #
Set Which relay
(1 or 2): _
HOURS UNLOCK
ENTER: _ _ PRESS #
SELECT PROGRAM
ENTER: _ _ PRESS #
SELECT PROGRAM
ENTER: _ _ PRESS #
Welcome to Pach’
MESSAGE SEGMENT 1