Pacific AMX series Operation Manual - Section 1

SECTION 1        GENERAL 

- 1 - 

SECTION 1

GENERAL

1.0 GENERAL

This manual is written to provide the information required to use the AMX-Series AC Power Source.  Operation 

of the Models 105-AMX, 108-AMX, 112-AMX, 125-AMX, 140-AMX, 160-AMX, 305-AMX, 308-AMX, 312-

AMX, 320-AMX, 345-AMX, 360-AMX, 390-AMX, and 3120-AMX is described in this document. 

This manual is an Operations Manual.  Installation, operation, and calibration are the subjects covered by this 

manual. 

1.1 

USING THIS MANUAL

This manual provides instructions for installation and use of the AMX-Series Power Source equipment.  For this 

reason, it is very important that the user reads sections 1, 3, and 4 prior to using this equipment. A thorough 

understanding of these sections is required to properly operate this equipment. 

Section 2 states the specifications of the equipment.  Knowledge of this information is required to gain 

maximum use of this equipment for a given application.   The user is encouraged to read this section in order to 

gain a deeper understanding of the capabilities of the AMX-Series Power Source. 

Sections 5 and 6 list maintenance and calibration requirements of this equipment.  Refer to these sections when 

either maintenance or calibration is required. 

Section 7 describes service methodology and provides system, sub-assembly, and component part numbers to 

aid the user in making factory authorized field repairs. 

This equipment is configured with a modular controller.  This allows for the creation of systems with various 

control characteristics and specifications.  This manual describes the operation of the basic power source.  

Detailed information relative to the UMC-31 Controller is also included is described in Section 8 of this 

manual.  The UPC controllers are described in a separate manual.  Refer to the UPC-Series Operation Manual 

for such information. 

Section 9 contains product change notices, errata and data relative to customer specified modifications.   

Always read this section before operating the equipment.  This is especially true when modifications have been 

installed, since these can change system operation. 

If questions arise while reading this manual, the user is encouraged to call the Pacific Power Source. Pacific 

maintains a toll-free number which is 1-800-854-2433.