PACIFIC CYCLE 22-PS140 Owner's Manual - page 8
8
©2006 Pacific Cycle, Inc.
SLIDE ASSEMBLY
Required Parts:
Slide x1
Rail/Ladder Leg x2
Front Leg x2
Ladder Step x2
Link Bar x2
Proper
Placement:
Slide Assembly
Correct Location
Incorrect
Location
Pre-Assembled Parts:
• The screws and bolts for the slide rail/ladder legs are inserted on the slide. They will need to be removed prior to
inserting the legs into the slide.
• The ladder steps should have screws and nuts installed. These will need to be removed prior to inserting the legs and
then reassembled with the head of the screw facing out.
Step Illustration
Instructions Hardware
Reference
1
Remove the screws, washers, and lock nuts from
the holes in the slide.
Part Ref. #: PSHW24
2
Insert the rail/ladder legs through the holes in the
top of the slide. Align the ladder holes with the
slide holes.
3
Insert the screws through the holes in the back of
the slide and secure them to the hand rails with the
screws and locking nuts provided.
Part Ref. #: PSHW24