Pacific Micro Systems DM1210N Operation Manual - Outline:
DM1210N © Pacific Micro Systems
1
OUTLINE:
This Data Multiplexer DM1210N receives data from a number of different Satellite
Navigators, GPS's, Lorans, etc capable of sending NMEA0182/3, Furuno CIF, JRC
format, Koden 8805/8811, Kaijo Denki format or Simrad EK500 depth format.
These can be converted to NMEA0183 and transferred to any other output. The
data can also be input and output on an UTP 10Meg Ethernet port.
Features:
1 Ethernet port, 10Mb, UDP.
12 Current Loop, RS422 or RS232 asynchronous serial Inputs.
10 Serial Outputs.
10 x Current Loop or RS422 asynchronous serial Outputs.
4 of the 10 also have RS232 asynchronous serial Outputs.
User selectable baud rates to allow high thruput of data..
Conversion of NMEA0183, Furuno CIF to NMEA0183 or Furuno CIF serial data.
Full transfer capabilities between all Inputs & Outputs allowing flexible data
combining.
Filtering of NMEA 0183 data thru any input or output, ie All, GGA, VTG, ZDA
etc
NMEA0183 or Furuno CIF sentences can be generated from trigger and depth
pulses with selectable NMEA0183 depth sentence ie. SDDBT, SDDBS etc. Output
in Meters, Fathoms or Feet depth output with selectable sound velocity factors
between 1450 and 1550 m/s.
Convert Simrad ITI net position to TLL sentence for display on plotter.
Convert Furuno Sonar target data to TTM sentence for display on plotter.
Capability to change NMEA0183 talkers on any outputs.
Generates log pulses from NMEA0183 sentence VTG or VHW in 100, 200 or 400
PPNM.
Generates NMEA0183 sentence VTG or VHW from 100, 200 or 400 PPNM input.
Alarm output when predefined conditions are met ie No GPS, No DGPS etc.
Galvanic isolation between input supply, data inputs and outputs.
RFI shielded housing.
Status LEDs on all inputs and outputs.
4 x binary inputs/outputs