Pacific Micro Systems DM1210N Operation Manual - Dm1210N Operation:
DM1210N © Pacific Micro Systems
3
DM1210N OPERATION:
1.
The RX LED's are normally off and flashing on when receiving serial
data.
2.
As data is received in 1 thru 12 the appropriate RX LED will flash.
3.
As data is transmitted out 1 thru 10 the appropriate TX LED will flash.
DMxxConfig.EXE (DM1210N CONFIGURATION):
Due to the extensive capabilities available in the DM1210N, configuration is
accomplished though the Configuration program DMxxConfig.exe.
Connect the DM1210N Network port to the PC network port via a cross over cable,
or standard cable and network hub, and launch the program DMxxConfig.EXE.
Click on the button Search for DM1210N’s.
All DM1210N’s on the network will be listed in the list box.
Highlight the DM1210N (Serial Number and IP Address) of the DM1210N to
configure.
Click on the Get Config menu item to get the selected DM1210N’s current
configuration.
Change the configuration as required using the Options and Transfer Menu Items.
Update the DM1210N by clicking on the Update Config Menu Item.