Pacific Micro Systems DM1210N Operation Manual - Parts Supplied:
DM1210N © Pacific Micro Systems
2
PARTS SUPPLIED:
1 x DM1210N Interface.
INSTALLATION:
1.
Run a two core screened data cable from each serial source to the required
serial input..
2.
Run a two core screened data cable from each output to the data
destinations.
3.
Run a standard UTP Cat5 patch cable (crossover) between the DM1210N
Network port and the network port on the target PC or a straight thru cable
to a hub that the PC is also plugged in to.
4.
Run the supply cable to a suitable 1135v supply. (Red/Black +volts,
Black volts).
Note:
The DM1210N has DC isolation between its power supply input and ground. This
makes it suitable for interfacing to any computer installation and all isolated
ground equipment, without affecting the integrity of the battery positive (+) or
negative () relative to ground.