S8mpd quick start guide pakedgedevice&software inc pakedgedevice&software inc. Pakedgedevice&software inc. Quick start guide s8mpd enterprise-class, 8-port poe powered fully managed switch.
2 s8mpd quick start guide pakedgedevice&software inc pakedgedevice&software inc. Table of contents introduction ...................................................................................................................................................... 3 quick switch overview ................
3 s8mpd quick start guide pakedgedevice&software inc pakedgedevice&software inc. Introduction this guide has been written to allow you to get up and running quickly with the s8mpd pakedge switch keeping a few assumptions in mind: a. You have a working knowledge of networking hardware configuration b...
4 s8mpd quick start guide pakedgedevice&software inc pakedgedevice&software inc. The rear panel ( figure 2 ) is where the ports and other equipment connections are located. Table 3 describes each port and its function. Figure 2: rear panel of the s8mpd name explanation dc connector 12v/1a 8 10/100/1...
5 s8mpd quick start guide pakedgedevice&software inc pakedgedevice&software inc. B. Physically mount the s8mpd switch near the power and network connections (i.E. Backbone switch, firewall/router or behind a tv) 2. Connect the s8mpd to a power source.
6 s8mpd quick start guide pakedgedevice&software inc pakedgedevice&software inc. 3. Connect your computer to any of the available ports on the s8mpd. 4. Configure the switch to an ip address that matches your network. Configuration process is described in the following sections. Configuration there ...
7 s8mpd quick start guide pakedgedevice&software inc pakedgedevice&software inc. Figure 4: tcp/ip properties 3. Select “use the following ip address” and manually type in the ip address and subnet mask into the provided boxes, as in the example above. (be sure the ip address and subnet mask are on t...
8 s8mpd quick start guide pakedgedevice&software inc pakedgedevice&software inc. Figure 5: s8mpd web interface please note: once you have logged in, you may use the web interface ( figure 5 ) to configure the switch and customize it for your environment. You may also refer to the complete product ma...
9 s8mpd quick start guide pakedgedevice&software inc pakedgedevice&software inc. Resetting the ip address from terminal configuring the switch using the console cable method is more involved. However, this method is helpful if the ethernet interfaces are not functioning properly or the incorrect ip ...
10 s8mpd quick start guide pakedgedevice&software inc pakedgedevice&software inc. Troubleshooting & support if you are unable to get the s8mpd switch functional using this guide, you can refer to the full manual on our website or contact our technical support department for help. They are available ...
