Packedge s8mpd Quick Start Manual - page 7
7
S8Mpd Quick Start Guide
pakedgedevice&software
inc
pakedgedevice&software
inc.
Figure 4: TCP/IP Properties
3. Select “Use the following IP Address” and manually type in the IP address and subnet mask
into the provided boxes, as in the example above. (Be sure the IP address and subnet mask
are on the same subnet as the S8Mpd).
4. Click OK to close the dialog then click OK to close the Local Area Connection Properties
dialog.
5. Now open a web browser (Internet Explorer, Firefox and Chrome browsers all work for
configuring the S8Mpd, but Firefox is preferred)
6. Enter the switch’s default IP address: 192.168.1.200 into the Address Bar and press
7. The default password is pakedgep. Enter the password and click “Apply” to be logged into
the web administration portal. Please note that if you have the preconfigured vlan version of
this swtich, which is the model S8Mpdv, the password will be pakedgev
8. In the web administration portal, you will be able to configure, update and reset the S8Mpd.