Pakedge SW24-GBM Quick Installation Manual - page 7
Manual is about: Enterprise-Class, 24-Port Fully Managed Switch
of
12
SW24-GBM QUICK INSTALLATION GUIDE
CONFIGURATION
There are two ways to complete the initial configuration of the SW24-GBM switch – either by using the
standard IP address and a web browser or the console cable and a terminal emulation program such as
PuTTY or HyperTerminal.
CONFIGURING THE SWITCH USING THE WEB
INTERFACE
1. First you need to configure the PC with IP address
192.168.1.10, and subnet mask 255.255.255.0
by going to the Windows Control Panel, double-
click Network Connections and double-click the
connection of your Network Interface Card (NIC).
The Local Area Connection Properties dialog
appears:
6
Figure 3:
Local Area Connection Properties