Pakedge WK-2-C Quick Start Manual - page 2
Manual is about: 802.11ac Dual Band Access Point
of
10
2
2
Package contents
Please refer to the installation manual of your product.
WK-2-C
• 802.11ac Dual Band Access Point
• Built-in 3×3 internal antennas
• Powered by PoE+ (by PoE+ injector or PoE+ switch)
• 2 LAN ports for network extensions
System requirements
• Windows or Mac PC with an Ethernet interface
WK-2-C default settings
• Operation Mode: Access Point
• IP Address: IP will be automatically assigned by router if a DHCP server is detected or, if no
DHCP server is detected, the default IP address will be automatically set to 192.168.1.250.
• Username/Password: pakedge/pakedgea
• SSID: Pakedge2.4-1 and Pakedge5-1
• Power Output: High
• Security: Disabled