Pakedge WK-2-C Quick Start Manual - page 8
Manual is about: 802.11ac Dual Band Access Point
of
10
8
8
Logging in to the access point
To log in to the access point:
1 Connect a computer to the WK-2-C with an Ethernet cable.
2 Enter 192.168.1.250 into the address bar of your web browser. You should see a login page.
3 In the username box, type pakedge. In the password box, type pakedgea, then click Login.
The following page will display when logged in:
Note:
If your computer is not set to the default IP scheme of the WK-2-C (192.168.1.X), you must
first configure the TCP/IP settings on your computer to log in through a web browser.