Palazzetti Ecofire Adagio Installation, User And Maintenance Manual - 8 Preliminary
46/136
cod. 00 477 2290 - 07/2013 - Palazzetti - PN - Italy
USE AND MAINTENANCE
8 PRELIMINARY
OPERATIONS
8.1 LOADING THE PELLETS
+!!
¢#$
The pellets are loaded into in the hopper using a
scoop.
Do not empty the sack directly into the hopper so
as to avoid loading sawdust or other foreign bodies
that may affect proper stove operation and avoid
spilling pellets outside of the hopper.
Make sure the hopper lid is well closed again after
having loaded the pellets. A safety switch (just for
the models that are equipped with it) makes sure
that the pellet tank lid has been closed properly (IS
in $
pellet tank lid stays open for more than one minute
while the stove is still working.
At this point, to take advantage of the ‘Autonomy’
function, use the arrow buttons
to move to
the combustible icon
!
. Select “Full” by pressing
and press the
button
In order to disable this function, select “Off” instead
of “Full”.
8.2 POWER
SUPPLY
Plug the stove into the mains power supply, move
the power switch at the rear of the stove to position
“I” (Fig. 8.2). If the connections are correct the
stove will emit a series of intermittent beeps, the
display will come on.
J "<<<
plugging the stove into the power supply.
If not using the appliance for an extended period,
the switch at the rear of the stove should be moved
to position (O).
8.3 INITIAL
SETTINGS
The language, current date and time need to be
set before using the stove.
8.3.1 Time and Date setting
To set the date:
a) Use the
buttons to go to the setup menu
and press
;
b) Use the
button to select the password “7” and then press
'
c) Use the
button to scroll to and select submenu
[3]
and press
'
d) +¢'
buttons and press
;
e) +¢'
buttons and press
;
f) +¢'
buttons and press
;
g) +¢'
buttons and press
;
h) +¢'
buttons and press
;
i) +¢£¢#]$'
buttons;
j) Press
IS