Read this first read this first.
Start here here’s what you’ll do with this guide: • charge and set up your handheld. • install palm ® desktop software and other software. • synchronize your handheld with your computer. Important! Already use a palmone™ handheld? Before going on to step 1, synchronize your current handheld with you...
Connect and charge 1 a. Connect the sync cable to your handheld and to the usb port on the back of your computer. B. Plug the ac charger into an outlet and connect it to the handheld. C. Charge for three hours. Be sure to fully charge your handheld before going on to the next step. Usb sync cable po...
Set up 2 a. Press the power button. B. Remove the stylus. C. Follow the onscreen instructions to set up your handheld. Tip: take the quick tour to learn more about the great features of your tungsten e2 handheld. Power button stylus problems? See the "troubleshooting" section in the upcoming pages..
Install software 3 to install palm desktop software and other important software, insert the cd into your computer’s cd drive. Problems? See the "troubleshooting" section in the upcoming pages. Windows: follow the installation instructions that appear on your computer screen. Mac: double-click the c...
Get answers, learn more take the tutorial learn to use the popular features of your handheld. Insert the installation cd in your computer and click here for an interactive tutorial . Open palm desktop software on your computer and click help . Click here for the manual . For more detail, go online: ...
Look for these great features on your computer palm desktop software . Enter info in palm desktop software and it shows up on your handheld the next time you synchronize. Palmone quick install (windows only) . Install multiple applications, photos, videos, and more on your handheld the next time you...
Troubleshooting support information is also available at www.Palmone.Com/intl/support your handheld does not turn on, or does not respond when you tap it 1. Try turning it on by pressing one of the quick buttons on the front panel. 2. Do a soft reset. Use the stylus to gently press the reset button ...
If synchronization does not begin be sure the sync cable is plugged into your handheld and a usb port on the back of your computer. Check your computer: windows: 1. Make sure the hotsync ® icon appears in the group of icons in the lower-right part of your screen. If not: a. Click the start button an...
Check your handheld: 1. Tap home button twice, and then tap hotsync in applications. 2. In the hotsync application, make sure of the following: – local is highlighted. If it isn’t highlighted, tap local. – the phrase cable/cradle appears. If not, tap the pick list, and then tap cradle/cable. 3. Tap ...
Stylus power button press to turn handheld on/off. Favorites find headphone jack note pad press to turn on handheld and open note pad. Contacts press to turn on handheld and open contacts. 5-way navigator calendar press to turn on handheld and open calendar. Tasks press to turn on handheld and open ...
Palmone, inc. 400 n. Mccarthy blvd. Milpitas, ca 95035, u.S.A copyright © 2004 palmone, inc. All rights reserved. Palmone, tungsten, "t" (stylized), palm powered, and hotsync are among the trademarks or registered trademarks owned by or licensed to palmone, inc. Palmone, inc. Uses the bluetooth wire...
