Pana-Pacific Blue Eagle ll Instruction Manual - Positioning
Blue Eagle ll Ultra Noise Cancelling Headset
HEADSET ADJUSTMENTS / MICROPHONE
POSITIONING
Headset Adjustment
1.Place the headset on your head with the ear cushion on your left or
right ear.
2.Swivel microphone boom up and over to position it for wear on the
right or left side of the headset.
3.Place the cushioned T-bar on the side of your head above your ear.
4.Slide headband in or out for a secure fit.
Microphone Positioning
Microphone positioning is important to ensure proper microphone
performance.
For quality voice input and effective background noise cancellation,
position microphone a finger’s width away from your face just below
bottom lip.
Because the Blue Eagle II headset professional grade microphone is
sensitive, slight adjustments in microphone positioning may help to
achieve optimum sound quality.
BASIC OPERATIONS
Idle Mode / Standby Mode / In-Call Mode
The headset is switched off automatically when you remove it from the
power adapter; therefore, you have to turn it on to place the headset in
Idle Mode.
When the headset is in Idle Mode, the blue indicator light on the headset
will flash slowly, every 4 seconds. Follow the directions in the section
“Pairing” to properly pair your Blue Eagle II headset to a Bluetooth device
before use.
If the headset is in Standby Mode the blue indicator light on the headset
will flash once every 2 seconds. All incoming phone calls will be
transferred to the headset automatically.