Pana-Pacific Blue Eagle ll Instruction Manual - page 9
Blue Eagle ll Ultra Noise Cancelling Headset
USING THE BLUE EAGLE II HEADSET WITH OTHER BLUETOOTH-
ENABLED DEVICES
Before use, make sure the headset is on.
1.Turn on the headset and position the microphone properly.
2.Activate your other Bluetooth device and connect Blue Eagle II
according to the User’s Manual of the other device.
3.To end communication with the Blue Eagle II headset and the other
Bluetooth device, press the multi-function button on the headset for
1 second, then release.
IMPORTANT: Computer software programs may require you to activate
the Bluetooth audio option before the Blue Eagle II headset can
communicate with your computer.
Contact the software manufacturer if you need assistance activating this
Bluetooth option.
ALTERNATING THE HEADSET WITH MULITIPLE BLUETOOTH
DEVICES
If you alternate using more than one Bluetooth device with the Blue Eagle
II headset, you will need to re-link the Bluetooth devices each time you
alternate between them. If your other Bluetooth product has a menu
option, you may have the ability to reconnect to the Blue Eagle II headset
via the menu (consult the product’s user guide). If this option is not
available, re-link the products together by following the Pairing procedure
in this Blue Eagle II User’s Manual.
Indicator Lights: Amber or Blue
Status
Light Color
Descriptions
Pairing
Blue
Blink rapidly
Idle Mode
Blue
Blink once every 4 seconds
Standby Mode
Blue
Blink once every 2 seconds
In-Call Mode
Blue
Blink 2 times every 2 seconds
Low Battery
Amber
Blink once every 5 seconds
Charging
Amber
Light on
Charging Completed
Amber
Light off